Collision Prevention not working with external FC
-
I want to test Collision Prevention with external FC, I am using the starling setup on another system with cube orange as a flight controller. I have put the modalai forked PX4 repo on the cube and testing. When I tested collision prevention with guide angle of 30, the drone navigates away from the obstacle without colliding once it detects an obstacle. But when I set the guide angle to 0, the system is not stopping, it will hit the obstacle. I tried with different distances starting from 0.1 m and upto 1.5 m and still it is not stopping. I tried changing the MPC pose modes also. I'll add the logs below.
@Eric-Katzfey Can you help me with this please?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login