voxl-mapper/planner for a Seeker drone

[tom]

@Pooyan We can really only offer support with the latest SDK, you can read through the SDK 0.9 docs here if you'd like to see our old docs: https://docs.modalai.com/voxl-sdk-0_9/

This is the voxl-mapper section based on SDK 0.9.5 https://docs.modalai.com/voxl-mapper-0_9/

[Pooyan]

@tom Thank you so much for the reply and information. I understand that for sure.

[Pooyan]

@tom Now I have upgrade SDK to 1.1.2, and did everything again through this link:
https://gitlab.com/voxl-public/voxl-sdk/services/voxl-mapper/-/tree/master?ref_type=heads

The thing is that the voxl-mapper is Enabled but not running and when I am trying the voxl-mapper command, I get the following error:

I would appreciate it if you could give me some hint on this.
Thank you so much.

[Pooyan]

@Pooyan there was an internet connection issue and after that I used "opkg update && opkg upgrade", and then "opkg install voxl-portal voxl-mapper " for installing mapper again and now this problem is solved.

[Pooyan]

@tom Hello again,

The SDK was updated to 1.2.0 and it was because of putting the configure-opkg on dev as it was said in the GitLab voxl-mapper link. I went through every steps in the following link again. Do you have any idea about what I can do?
https://gitlab.com/voxl-public/voxl-sdk/services/voxl-mapper

as you can see, when I run the "voxl-mapper", I get the following errors and it keeps repeating.

Thank you so much for your help.

[Pooyan]

@tom Again I changed the version to 1.1.2 and got the same issue about loading shared libraries: libvoxblox.so. So I want to explain more what I do in case you could help me better.
I have included the screenshot as well.

When I push the built mapper to voxl I get the following error as well. I wanted to show that to you as well:

The codes I use to do that are as follow:
git clone https://gitlab.com/voxl-public/voxl-sdk/services/voxl-mapper.git
./install_build_deps.sh APQ8096 dev
./build.sh apq8096
./make_package.sh ipk
./deploy_to_voxl.sh

I would appreciate it if you could give me any hints on this.

[tom]

@Pooyan After a fresh flash using the release and ./install.sh if you adb on and run opkg install voxl-mapper and then run voxl-mapper what happens?

[Pooyan]

@tom I have just flashed it again and before anything else I did opkg install voxl-mapper and I got this:

I did it when the seeker is connected to the internet and the adb cable is connected, and I got this:

Still I didn't even install the FC2 through QGC or doing anything else.

[tom]

@Pooyan Oh sorry, on voxl run opkg install /data/voxl-suite-offline-packages/voxl-mapper*.ipk

[Pooyan]

@tom thank you for the command. I get this now:

[tom]

@Pooyan Okay you'll just have to install the dependencies in the same way. I just did this on my voxl1:

cd /data/voxl-suite-offline-packages/
opkg install voxl-ceres-solver_2\:1.14.0-10.ipk 
opkg install voxl-nlopt_2.5.0-4.ipk 
opkg install voxl-voxblox_1.1.5.ipk 
opkg install voxl-mapper_0.2.0.ipk

[Pooyan]

@tom Thank you so much. Now it seems that I have it and when I run it I get the following errors:

Do I need to upload the FC2? as I didnt do it yet.

[tom]

@Pooyan Cool you shouldn't have to change anything on the flight core for this to work, I'll see if I can get someone else from my team to take a look.

[Pooyan]

@tom Thank you so much. I didn't change anything and just put the commands you gave me. I am looking forward to hearing from you.

[Pooyan]

@tom So, if I just restart and then do "systemctl enable voxl-mapper", it will work. But if I run it on CMD with voxl-mapper, it will still show me the same error. If you have any comments I would appreciate it, otherwise it works in that way.

Thank you so much.

[tom]

@Pooyan Interesting, systemd is ideal way for it to be running