Camera Calibration Needed
-
@tom also Missing /data/modalai/voxl-imu-server.cal
-
@Cai-Bill Also easy, just adb on and run
voxl-configure-imu -
@tom Thank you I have the 120 second limits on reply XD, sorry for the delay
-
Hi Tom,
Someone in our team did the upgrade to our fleet of RB5 without backing up the camera calibration file.
Please could you send us your backup files, and default parameters if possible.
Or the link where to get them if available in Gitlab.Best wishes,
Massa Ndong -
@tahawaru If you can provide me the serial number of your RB5 drone I can do so. It should be located somewhere on the outside of the drone and will be in the form MXX00000XXX
In order to get all the necessary services running and PX4 params set, I would recommend running
voxl-configure-skuon your drone and running through the SKU setup, and then after runningvoxl-configure-mpaBehind the scenes, RB5 shares the same param set as our sentinel drone, those params can be found here: https://gitlab.com/voxl-public/voxl-sdk/utilities/voxl-px4-params/-/blob/master/params/v1.14/platforms/Sentinel_V1.params
-
Many thanks.
Here is what I could find as a serial numbers on 2 Rb5s:
M2300000JDV
M2300000JEEDo you need all other numbers?
We have 7 of them in the lab.Best wishes,
-
@tahawaru Those seem to be the serial numbers of the drone's power modules themselves. There should be a serial number on the plastic outside casing of the RB5
-
-
@tahawaru I'll send you an email with what I have
-
@tom
Thank you very much.
