VOXL camera configuration

[Kris]

@Eric-Katzfey
Ok, thank you.
I will start with attempting /dev/video3 first.

[Kris]

@Eric-Katzfey
It seems as if VOXL1 is not able to connect with my UVC camera.
Output when UVC camera is connected to the Seeker;

voxl:~$ gst-device-monitor-1.0 Video/Source
Probing devices...


(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed
No devices found!
voxl:~$ gst-device-monitor-1.0             
Probing devices...


(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

Device found:

	name  : msm_fd
	class : Video/Sink
	caps  : video/x-raw, format=(string)GRAY8, width=(int)[ 320, 854 ], height=(int)[ 240, 480 ], interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1, colorimetry=(string){ bt601, smpte240m, bt709, 2:4:5:2, 2:4:5:3, 1:4:7:1, 2:4:7:1, 2:4:12:8, 2:6:5:7, 2:0:0:0 };
	properties:
		device.path = /dev/video1
		udev-probed = false
		device.api = v4l2
		v4l2.device.driver = msm_fd
		v4l2.device.card = msm_fd
		v4l2.device.bus_info = ""
		v4l2.device.version = 201287 (0x00031247)
		v4l2.device.capabilities = 69206018 (0x04200002)
		v4l2.device.device_caps = 2097152 (0x00200000)

Output when my UVC camera is connected to my Linux PC;

seeker3@seeker3-VirtualBox:~$ gst-device-monitor-1.0 Video/Source
Probing devices...


Device found:

	name  : e-CAM83_USB
	class : Video/Source
	caps  : video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)3840, height=(int)2160, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 15/1 };
	        video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1;
	properties:
		udev-probed = true
		device.bus_path = pci-0000:00:0c.0-usb-0:2:1.0
		sysfs.path = /sys/devices/pci0000:00/0000:00:0c.0/usb1/1-2/1-2:1.0/video4linux/video0
		device.bus = usb
		device.subsystem = video4linux
		device.vendor.id = 2560
		device.vendor.name = e-ConSystems
		device.product.id = c184
		device.product.name = e-CAM83_USB
		device.serial = e-ConSystems_e-CAM83_USB_00.00.01
		device.capabilities = :capture:
		device.api = v4l2
		device.path = /dev/video0
		v4l2.device.driver = uvcvideo
		v4l2.device.card = e-CAM83_USB
		v4l2.device.bus_info = usb-0000:00:0c.0-2
		v4l2.device.version = 328933 (0x000504e5)
		v4l2.device.capabilities = 2225078273 (0x84a00001)
		v4l2.device.device_caps = 69206017 (0x04200001)
	gst-launch-1.0 v4l2src ! ...


Device found:

	name  : e-CAM83_USB
	class : Video/Source
	caps  : video/x-raw, format=(string)YUY2, width=(int)640, height=(int)480, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)15/1;
	        image/jpeg, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1;
	properties:
		udev-probed = true
		device.bus_path = pci-0000:00:0c.0-usb-0:2:1.0
		sysfs.path = /sys/devices/pci0000:00/0000:00:0c.0/usb1/1-2/1-2:1.0/video4linux/video2
		device.bus = usb
		device.subsystem = video4linux
		device.vendor.id = 2560
		device.vendor.name = e-ConSystems
		device.product.id = c184
		device.product.name = e-CAM83_USB
		device.serial = e-ConSystems_e-CAM83_USB_00.00.01
		device.capabilities = :capture:
		device.api = v4l2
		device.path = /dev/video2
		v4l2.device.driver = uvcvideo
		v4l2.device.card = e-CAM83_USB
		v4l2.device.bus_info = usb-0000:00:0c.0-2
		v4l2.device.version = 328933 (0x000504e5)
		v4l2.device.capabilities = 2225078273 (0x84a00001)
		v4l2.device.device_caps = 69206017 (0x04200001)
	gst-launch-1.0 v4l2src device=/dev/video2 ! ...

seeker3@seeker3-VirtualBox:~$ gst-device-monitor-1.0
Probing devices...


Device found:

	name  : Monitor of Built-in Audio Analog Stereo
	class : Audio/Source
	caps  : audio/x-raw, format=(string){ S16LE, S16BE, F32LE, F32BE, S32LE, S32BE, S24LE, S24BE, S24_32LE, S24_32BE, U8 }, layout=(string)interleaved, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-alaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-mulaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	properties:
		device.description = "Monitor\ of\ Built-in\ Audio\ Analog\ Stereo"
		device.class = monitor
		alsa.card = 0
		alsa.card_name = "Intel\ 82801AA-ICH"
		alsa.long_card_name = "Intel\ 82801AA-ICH\ with\ AD1980\ at\ irq\ 21"
		alsa.driver_name = snd_intel8x0
		device.bus_path = pci-0000:00:05.0
		sysfs.path = /devices/pci0000:00/0000:00:05.0/sound/card0
		device.bus = pci
		device.vendor.id = 8086
		device.vendor.name = "Intel\ Corporation"
		device.product.id = 2415
		device.product.name = "82801AA\ AC\'97\ Audio\ Controller"
		device.form_factor = internal
		device.string = 0
		module-udev-detect.discovered = 1
		device.icon_name = audio-card-pci
	gst-launch-1.0 pulsesrc device=alsa_output.pci-0000_00_05.0.analog-stereo.monitor ! ...


Device found:

	name  : Built-in Audio Analog Stereo
	class : Audio/Source
	caps  : audio/x-raw, format=(string){ S16LE, S16BE, F32LE, F32BE, S32LE, S32BE, S24LE, S24BE, S24_32LE, S24_32BE, U8 }, layout=(string)interleaved, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-alaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-mulaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	properties:
		alsa.resolution_bits = 16
		device.api = alsa
		device.class = sound
		alsa.class = generic
		alsa.subclass = generic-mix
		alsa.name = "Intel\ 82801AA-ICH"
		alsa.id = "Intel\ ICH"
		alsa.subdevice = 0
		alsa.subdevice_name = "subdevice\ \#0"
		alsa.device = 0
		alsa.card = 0
		alsa.card_name = "Intel\ 82801AA-ICH"
		alsa.long_card_name = "Intel\ 82801AA-ICH\ with\ AD1980\ at\ irq\ 21"
		alsa.driver_name = snd_intel8x0
		device.bus_path = pci-0000:00:05.0
		sysfs.path = /devices/pci0000:00/0000:00:05.0/sound/card0
		device.bus = pci
		device.vendor.id = 8086
		device.vendor.name = "Intel\ Corporation"
		device.product.id = 2415
		device.product.name = "82801AA\ AC\'97\ Audio\ Controller"
		device.form_factor = internal
		device.string = front:0
		device.buffering.buffer_size = 17632
		device.buffering.fragment_size = 4408
		device.access_mode = mmap
		device.profile.name = analog-stereo
		device.profile.description = "Analog\ Stereo"
		device.description = "Built-in\ Audio\ Analog\ Stereo"
		alsa.mixer_name = "Analog\ Devices\ AD1980"
		alsa.components = AC97a:41445370
		module-udev-detect.discovered = 1
		device.icon_name = audio-card-pci
	gst-launch-1.0 pulsesrc device=alsa_input.pci-0000_00_05.0.analog-stereo ! ...


Device found:

	name  : Built-in Audio Analog Stereo
	class : Audio/Sink
	caps  : audio/x-raw, format=(string){ S16LE, S16BE, F32LE, F32BE, S32LE, S32BE, S24LE, S24BE, S24_32LE, S24_32BE, U8 }, layout=(string)interleaved, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-alaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-mulaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	properties:
		alsa.resolution_bits = 16
		device.api = alsa
		device.class = sound
		alsa.class = generic
		alsa.subclass = generic-mix
		alsa.name = "Intel\ 82801AA-ICH"
		alsa.id = "Intel\ ICH"
		alsa.subdevice = 0
		alsa.subdevice_name = "subdevice\ \#0"
		alsa.device = 0
		alsa.card = 0
		alsa.card_name = "Intel\ 82801AA-ICH"
		alsa.long_card_name = "Intel\ 82801AA-ICH\ with\ AD1980\ at\ irq\ 21"
		alsa.driver_name = snd_intel8x0
		device.bus_path = pci-0000:00:05.0
		sysfs.path = /devices/pci0000:00/0000:00:05.0/sound/card0
		device.bus = pci
		device.vendor.id = 8086
		device.vendor.name = "Intel\ Corporation"
		device.product.id = 2415
		device.product.name = "82801AA\ AC\'97\ Audio\ Controller"
		device.form_factor = internal
		device.string = front:0
		device.buffering.buffer_size = 19188
		device.buffering.fragment_size = 6396
		device.access_mode = mmap
		device.profile.name = analog-stereo
		device.profile.description = "Analog\ Stereo"
		device.description = "Built-in\ Audio\ Analog\ Stereo"
		alsa.mixer_name = "Analog\ Devices\ AD1980"
		alsa.components = AC97a:41445370
		module-udev-detect.discovered = 1
		device.icon_name = audio-card-pci
	gst-launch-1.0 ... ! pulsesink device=alsa_output.pci-0000_00_05.0.analog-stereo


Device found:

	name  : e-CAM83_USB
	class : Video/Source
	caps  : video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)3840, height=(int)2160, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 15/1 };
	        video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1;
	properties:
		udev-probed = true
		device.bus_path = pci-0000:00:0c.0-usb-0:2:1.0
		sysfs.path = /sys/devices/pci0000:00/0000:00:0c.0/usb1/1-2/1-2:1.0/video4linux/video0
		device.bus = usb
		device.subsystem = video4linux
		device.vendor.id = 2560
		device.vendor.name = e-ConSystems
		device.product.id = c184
		device.product.name = e-CAM83_USB
		device.serial = e-ConSystems_e-CAM83_USB_00.00.01
		device.capabilities = :capture:
		device.api = v4l2
		device.path = /dev/video0
		v4l2.device.driver = uvcvideo
		v4l2.device.card = e-CAM83_USB
		v4l2.device.bus_info = usb-0000:00:0c.0-2
		v4l2.device.version = 328933 (0x000504e5)
		v4l2.device.capabilities = 2225078273 (0x84a00001)
		v4l2.device.device_caps = 69206017 (0x04200001)
	gst-launch-1.0 v4l2src ! ...


Device found:

	name  : e-CAM83_USB
	class : Video/Source
	caps  : video/x-raw, format=(string)YUY2, width=(int)640, height=(int)480, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)15/1;
	        image/jpeg, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1;
	properties:
		udev-probed = true
		device.bus_path = pci-0000:00:0c.0-usb-0:2:1.0
		sysfs.path = /sys/devices/pci0000:00/0000:00:0c.0/usb1/1-2/1-2:1.0/video4linux/video2
		device.bus = usb
		device.subsystem = video4linux
		device.vendor.id = 2560
		device.vendor.name = e-ConSystems
		device.product.id = c184
		device.product.name = e-CAM83_USB
		device.serial = e-ConSystems_e-CAM83_USB_00.00.01
		device.capabilities = :capture:
		device.api = v4l2
		device.path = /dev/video2
		v4l2.device.driver = uvcvideo
		v4l2.device.card = e-CAM83_USB
		v4l2.device.bus_info = usb-0000:00:0c.0-2
		v4l2.device.version = 328933 (0x000504e5)
		v4l2.device.capabilities = 2225078273 (0x84a00001)
		v4l2.device.device_caps = 69206017 (0x04200001)
	gst-launch-1.0 v4l2src device=/dev/video2 ! ...

A simple video test will not work either.

voxl:~$ gst-launch-1.0 videotestsrc ! videoconvert ! autovideosink
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
WARNING: from element /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0: Resource not found.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/gst/autodetect/gstautodetect.c(347): gst_auto_detect_find_best (): /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0:
Failed to find a usable video sink
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
^Chandling interrupt.
Interrupt: Stopping pipeline ...
Execution ended after 0:00:17.998587815
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...

Are there any plugins that I could be missing?

[Kris]

Keeps failing to find a usable video sink.

voxl:~$ show-video-device-info.sh
/dev/video2: e-CAM83_USB 2560:c184
/dev/video3: e-CAM83_USB 2560:c184
voxl:~$ gst-launch-1.0 v4l2src device=/dev/video3 ! videoconvert ! autovideosink
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
WARNING: from element /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0: Resource not found.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/gst/autodetect/gstautodetect.c(347): gst_auto_detect_find_best (): /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0:
Failed to find a usable video sink
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not open device '/dev/video3' for reading and writing.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/sys/v4l2/v4l2_calls.c(625): gst_v4l2_open (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
system error: Device or resource busy
Setting pipeline to NULL ...
Freeing pipeline ...
voxl:~$ gst-launch-1.0 v4l2src device=/dev/video2 ! videoconvert ! autovideosink
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
WARNING: from element /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0: Resource not found.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/gst/autodetect/gstautodetect.c(347): gst_auto_detect_find_best (): /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0:
Failed to find a usable video sink
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not open device '/dev/video2' for reading and writing.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/sys/v4l2/v4l2_calls.c(625): gst_v4l2_open (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
system error: Device or resource busy
Setting pipeline to NULL ...
Freeing pipeline ...
voxl:~$ 

Output when debug command is used.

voxl:~$ GST_DEBUG=3 gst-launch-1.0 v4l2src device=/dev/video3 ! videoconvert ! autovideosink
Setting pipeline to PAUSED ...
0:00:00.229741613  4689    0xdf500 WARN              autodetect gstautodetect.c:347:gst_auto_detect_find_best:<autovideosink0> warning: Failed to find a usable video sink
0:00:00.277135238  4689    0xdf500 WARN                    v4l2 v4l2_calls.c:625:gst_v4l2_open:<v4l2src0> error: Could not open device '/dev/video3' for reading and writing.
0:00:00.277213207  4689    0xdf500 WARN                    v4l2 v4l2_calls.c:625:gst_v4l2_open:<v4l2src0> error: system error: Device or resource busy
ERROR: Pipeline doesn't want to pause.
WARNING: from element /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0: Resource not found.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/gst/autodetect/gstautodetect.c(347): gst_auto_detect_find_best (): /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0:
Failed to find a usable video sink
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not open device '/dev/video3' for reading and writing.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/sys/v4l2/v4l2_calls.c(625): gst_v4l2_open (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
system error: Device or resource busy
Setting pipeline to NULL ...
Freeing pipeline ...

[tom]

@Kris You can't use autovideosink on VOXL because it doesn't have a display

[Eric Katzfey]

@Kris Maybe try fakesink instead?

[Kris]

@Eric-Katzfey
I have tried both fakesink and playbin.
Neither of them work either.
Has anyone gotten gstreamer to successfully work on VOXL1?

[Kris]

@Eric-Katzfey
I also have another UVC camera, but it only outputs MJPG (compressed) and YUY2 (uncompressed 640x480 30fps) formats.

It works for streaming, but I am trying to record the video to the Seeker’s SD card.
Is there a way to do this with Gstreamer or a similar program?

[Kris]

@tom
Could this be the reason why no devices are found when I use gst-device-monitor-1.0 Video/Source on the VOXL1?

[Kris]

I see that the VOXL1 has the gst-plugins-good.
Is it possible to also add the gst-plugins-bad and gst-plugins-ugly?

[Eric Katzfey]

@Kris We use GStreamer in our voxl-streamer application. It does work on VOXL1.

[Kris]

@Eric-Katzfey
Ok, thank you for the confirmation.

[Kris]

@Eric-Katzfey
If possible, could you please provide me with a VOXL1 working pipeline (streaming or recording) using any UVC camera of your choice?

[Eric Katzfey]

@Kris That's not how it works on VOXL1. The voxl-uvc-server application places frames into an MPA pipe and the voxl-streamer application (based on gstreamer) reads those frames and processes them for output using RTSP. However, I do believe that I did try command line gst-launch-1.0 style pipelines with UVC cameras in the past and they worked. I don't have an example of one though. You may want to start with one of our supported UVC cameras first and then try to get your particular UVC camera working. I always start with the Logitech C270. We list the specific cameras that we support because each one caused us some issues and required code changes to make it work. We even had to fork the libuvc library in order to make changes to that to get some of the cameras working properly.

[Kris]

@Eric-Katzfey
Ok, I understand.
Thank you for all your help and support with this issue.
I will try one of your tested & supported UVC cameras.

[Kris]

@Eric-Katzfey
I bought the Logitech C270 and tried testing it with some Gstreamer commands.
So far I have been able to use it on my Linux PC with these commands.

Connected to PC and viewing video;

gst-launch-1.0 -v v4l2src ! video/x-raw,format=YUY2 ! videoconvert ! autovideosink

Connected to PC and recording to PC;

gst-launch-1.0 v4l2src device=/dev/video0 ! image/jpeg,width=640,height=480,framerate=30/1 ! jpegdec ! x264enc ! qtmux ! filesink location=C270.mp4 -e

However, when I connect the C270 to the Seeker I cannot get any of these to work.
I have tried different video devices 0-3 and I have also substituted the autovideosink with fakesink but these changes are still not working.

Could you please show me a Gstreamer example for this Logitech C270 camera that works on the Seeker?
I would like to either stream, record, or stream+record (possibly using tee) the video using gst-launch-1.0.
Thank you