Does VOXL2 support UAVCAN?
-
In particular, I want to use Here3 RTK and (if I understand correctly - perhaps I'm mistaken?) this is only supported over CAN
-
In particular, I want to use Here3 RTK and (if I understand correctly - perhaps I'm mistaken?) this is only supported over CAN
@Patrick-Hinchey The supported interface for the Here3 RTK is CAN bus and VOXL 2 does not support that interface. However, there is a "legacy" mode in that unit that allows operation using UART for GPS and I2C for the magnetometer. There isn't really any documentation about this mode but we were able to get it working in the past. It requires that you open the unit and turn the switch to the I2C setting and build some custom cabling. It isn't really a supported mode but it is possible.
-
@Patrick-Hinchey The supported interface for the Here3 RTK is CAN bus and VOXL 2 does not support that interface. However, there is a "legacy" mode in that unit that allows operation using UART for GPS and I2C for the magnetometer. There isn't really any documentation about this mode but we were able to get it working in the past. It requires that you open the unit and turn the switch to the I2C setting and build some custom cabling. It isn't really a supported mode but it is possible.
Thanks Eric, I'll look into the legacy mode
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login