Does VOXL2 support UAVCAN?
-
In particular, I want to use Here3 RTK and (if I understand correctly - perhaps I'm mistaken?) this is only supported over CAN
-
In particular, I want to use Here3 RTK and (if I understand correctly - perhaps I'm mistaken?) this is only supported over CAN
@Patrick-Hinchey The supported interface for the Here3 RTK is CAN bus and VOXL 2 does not support that interface. However, there is a "legacy" mode in that unit that allows operation using UART for GPS and I2C for the magnetometer. There isn't really any documentation about this mode but we were able to get it working in the past. It requires that you open the unit and turn the switch to the I2C setting and build some custom cabling. It isn't really a supported mode but it is possible.
-
@Patrick-Hinchey The supported interface for the Here3 RTK is CAN bus and VOXL 2 does not support that interface. However, there is a "legacy" mode in that unit that allows operation using UART for GPS and I2C for the magnetometer. There isn't really any documentation about this mode but we were able to get it working in the past. It requires that you open the unit and turn the switch to the I2C setting and build some custom cabling. It isn't really a supported mode but it is possible.
Thanks Eric, I'll look into the legacy mode
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login