VOXL camera configuration

Chad Sweet

Please do not try to modify the Seeker, it is unlikely you will be successful.

Have you tried to log your UVC camera on a linux computer? can you use that same method on VOXL?

Kris

@Chad-Sweet
I apologize if I gave the impression that I am trying to modify the Seeker.
I am just wondering if it is possible to use Hires + TOF + Stereo, with one of the stereo cameras acting as a tracking camera. If it is possible I would gladly purchase one of ModalAi's Hires cameras. At the moment, I am using TOF + Tracking + Stereo and attempting to stream and record a UVC camera.

Yes, I have tried viewing my UVC camera on my linux PC with several programs like OBS, guvcview, and Gstreamer.
I am able to log my UVC video using gstreamer on my linux PC as well.
However, when I try to connect my UVC camera on VOXL1 for the voxl-uvc-server, I receive this error;

voxl:~$ voxl-uvc-server -d
Enabling debug messages
voxl-uvc-server starting
UVC initialized
Device found
uvc_open failed
UVC exited
voxl-uvc-server ending

I have also tried using Gstreamer on the VOXL but I am not able to get a connection.
Here is the pipeline I used to stream the UVC camera on VOXL;

gst-launch-1.0 -v v4l2src device=/dev/video2 ! video/x-raw,format=YUY2 ! videoconvert ! omxh264enc speed-preset=ultrafast tune=zerolatency ! rtph264pay name=pay0 ! udpsink host=192.168.110.152 port=8554

I am not able to get a successful connection to the UVC camera on the VOXL. The led on the camera lets me know when there is a successful connection, and only the power led was on.
I have tried a simple capture and send video command but this did not work either. I have tried all my dev/video options (video0~video3) but none of them work.

gst-launch-1.0 v4l2src device=/dev/video0 ! decodebin ! omxh264enc ! rtph264pay ! udpsink port=8554

Is there a way to install v4l2-utils on the VOXL1?
Since the VOXL is not able to communicate/recognize the attached UVC h264 camera, than I think that VOXL might be missing the v4l2-utils package that my UVC camera needs.
Does the voxl-utils ipk contain the v4l2 parameters?

Chad Sweet

To change the image sensor on Seeker, you would have to disassemble the front end which would likely result in damage. It is really not recommended.

gstreamer should work similar to your USB setup on your Linux PC. Do you have a gstreamer command that is working on your PC?

if you type ls -la /dev/video* with your camera plugged in and unplugged, you should easily see which device it is enumerating to

What is the exact module number of the camera you are trying to install?

Kris

@Chad-Sweet
The gstreamer commands work on my Linux PC.
I am able to stream and record video when my UVC 2.0 camera is plugged directly into my Linux PC.
I just have to change some of the pipeline, because x264enc is not recognized on the VOXL. I use x264enc on my PC and omxh264enc on the VOXL.
I am using the e-CAM83 UVC 2.0 camera.
There is detailed information about this camera in this post.

Kris

@Chad-Sweet
If it’s possible to configure the Seeker with Hires + TOF + Stereo, where one stereo camera is acting as a tracking camera, can I send my Seeker back to ModalAi for this setup?
Would the Seeker still have the VIO and VOA capabilities with this kind of setup?

Kris

@Chad-Sweet
My UVC camera is recognized on the VOXL but the voxl-uvc-server will not connect to it.

voxl:~$ show-video-device-info.sh
/dev/video2: e-CAM83_USB 2560:c184
/dev/video3: e-CAM83_USB 2560:c184

Here is the ls -la /dev/video* command output from my Linux PC.

crw-rw----+ 1 root video 81, 0  3月 31 09:20 /dev/video0
crw-rw----+ 1 root video 81, 1  3月 31 09:20 /dev/video1
crw-rw----+ 1 root video 81, 2  3月 31 09:20 /dev/video2
crw-rw----+ 1 root video 81, 3  3月 31 09:20 /dev/video3

Chad Sweet

This post is deleted!

Chad Sweet

voxl-uvc-server only supports a few data types. You may need to modify the code to support the format of the e-CAM83

If you have a gstreamer command that works on your linux box, it should work on VOXL as well though.

Kris

@Chad-Sweet
Thank you so much for looking into this for me.

Can I ask for some assistance with modifying the voxl-uvc-server?

Do I modify the voxl-uvc-server C file, then make it into an ipk and push it into the VOXL?

Chad Sweet

The instructions are in the readme here: https://gitlab.com/voxl-public/voxl-sdk/services/voxl-uvc-server

Chad Sweet

@Chad-Sweet But yes, you modify the code, build it, and push the IPK to VOXL

Kris

@Chad-Sweet
Is the Hires + TOF + Stereo (one stereo configured as the tracking camera) configuration possible?
In case the e-CAM83 will not work with the Seeker.

Kris

@Chad-Sweet
Just to confirm,
If I modify the voxl-uvc-server/src/main.c file, to allow H264 format, would this work?
Or does the modification need to happen somewhere else in the main.c?
I’m just not exactly sure what or where I need to modify the voxl-uvc-server to make my UVC camera work.

Eric Katzfey

@Kris H264 is not supported in voxl-uvc-server. See https://gitlab.com/voxl-public/voxl-sdk/services/voxl-uvc-server/-/blob/dev/src/main.c#L64. You may be able to add support for it but there are some tricky aspects to H264 streaming that you would need to be aware of before attempting it. Seems like you should start with the video3 interface since it supports 640x480 YUYV

Kris

@Eric-Katzfey
Ok, thank you.
I will start with attempting /dev/video3 first.

Kris

@Eric-Katzfey
It seems as if VOXL1 is not able to connect with my UVC camera.
Output when UVC camera is connected to the Seeker;

voxl:~$ gst-device-monitor-1.0 Video/Source
Probing devices...


(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4152): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed
No devices found!
voxl:~$ gst-device-monitor-1.0             
Probing devices...


(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

(gst-device-monitor-1.0:4157): GStreamer-CRITICAL **: gst_element_message_full_with_details: assertion 'GST_IS_ELEMENT (element)' failed

Device found:

	name  : msm_fd
	class : Video/Sink
	caps  : video/x-raw, format=(string)GRAY8, width=(int)[ 320, 854 ], height=(int)[ 240, 480 ], interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1, colorimetry=(string){ bt601, smpte240m, bt709, 2:4:5:2, 2:4:5:3, 1:4:7:1, 2:4:7:1, 2:4:12:8, 2:6:5:7, 2:0:0:0 };
	properties:
		device.path = /dev/video1
		udev-probed = false
		device.api = v4l2
		v4l2.device.driver = msm_fd
		v4l2.device.card = msm_fd
		v4l2.device.bus_info = ""
		v4l2.device.version = 201287 (0x00031247)
		v4l2.device.capabilities = 69206018 (0x04200002)
		v4l2.device.device_caps = 2097152 (0x00200000)

Output when my UVC camera is connected to my Linux PC;

seeker3@seeker3-VirtualBox:~$ gst-device-monitor-1.0 Video/Source
Probing devices...


Device found:

	name  : e-CAM83_USB
	class : Video/Source
	caps  : video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)3840, height=(int)2160, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 15/1 };
	        video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1;
	properties:
		udev-probed = true
		device.bus_path = pci-0000:00:0c.0-usb-0:2:1.0
		sysfs.path = /sys/devices/pci0000:00/0000:00:0c.0/usb1/1-2/1-2:1.0/video4linux/video0
		device.bus = usb
		device.subsystem = video4linux
		device.vendor.id = 2560
		device.vendor.name = e-ConSystems
		device.product.id = c184
		device.product.name = e-CAM83_USB
		device.serial = e-ConSystems_e-CAM83_USB_00.00.01
		device.capabilities = :capture:
		device.api = v4l2
		device.path = /dev/video0
		v4l2.device.driver = uvcvideo
		v4l2.device.card = e-CAM83_USB
		v4l2.device.bus_info = usb-0000:00:0c.0-2
		v4l2.device.version = 328933 (0x000504e5)
		v4l2.device.capabilities = 2225078273 (0x84a00001)
		v4l2.device.device_caps = 69206017 (0x04200001)
	gst-launch-1.0 v4l2src ! ...


Device found:

	name  : e-CAM83_USB
	class : Video/Source
	caps  : video/x-raw, format=(string)YUY2, width=(int)640, height=(int)480, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)15/1;
	        image/jpeg, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1;
	properties:
		udev-probed = true
		device.bus_path = pci-0000:00:0c.0-usb-0:2:1.0
		sysfs.path = /sys/devices/pci0000:00/0000:00:0c.0/usb1/1-2/1-2:1.0/video4linux/video2
		device.bus = usb
		device.subsystem = video4linux
		device.vendor.id = 2560
		device.vendor.name = e-ConSystems
		device.product.id = c184
		device.product.name = e-CAM83_USB
		device.serial = e-ConSystems_e-CAM83_USB_00.00.01
		device.capabilities = :capture:
		device.api = v4l2
		device.path = /dev/video2
		v4l2.device.driver = uvcvideo
		v4l2.device.card = e-CAM83_USB
		v4l2.device.bus_info = usb-0000:00:0c.0-2
		v4l2.device.version = 328933 (0x000504e5)
		v4l2.device.capabilities = 2225078273 (0x84a00001)
		v4l2.device.device_caps = 69206017 (0x04200001)
	gst-launch-1.0 v4l2src device=/dev/video2 ! ...

seeker3@seeker3-VirtualBox:~$ gst-device-monitor-1.0
Probing devices...


Device found:

	name  : Monitor of Built-in Audio Analog Stereo
	class : Audio/Source
	caps  : audio/x-raw, format=(string){ S16LE, S16BE, F32LE, F32BE, S32LE, S32BE, S24LE, S24BE, S24_32LE, S24_32BE, U8 }, layout=(string)interleaved, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-alaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-mulaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	properties:
		device.description = "Monitor\ of\ Built-in\ Audio\ Analog\ Stereo"
		device.class = monitor
		alsa.card = 0
		alsa.card_name = "Intel\ 82801AA-ICH"
		alsa.long_card_name = "Intel\ 82801AA-ICH\ with\ AD1980\ at\ irq\ 21"
		alsa.driver_name = snd_intel8x0
		device.bus_path = pci-0000:00:05.0
		sysfs.path = /devices/pci0000:00/0000:00:05.0/sound/card0
		device.bus = pci
		device.vendor.id = 8086
		device.vendor.name = "Intel\ Corporation"
		device.product.id = 2415
		device.product.name = "82801AA\ AC\'97\ Audio\ Controller"
		device.form_factor = internal
		device.string = 0
		module-udev-detect.discovered = 1
		device.icon_name = audio-card-pci
	gst-launch-1.0 pulsesrc device=alsa_output.pci-0000_00_05.0.analog-stereo.monitor ! ...


Device found:

	name  : Built-in Audio Analog Stereo
	class : Audio/Source
	caps  : audio/x-raw, format=(string){ S16LE, S16BE, F32LE, F32BE, S32LE, S32BE, S24LE, S24BE, S24_32LE, S24_32BE, U8 }, layout=(string)interleaved, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-alaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-mulaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	properties:
		alsa.resolution_bits = 16
		device.api = alsa
		device.class = sound
		alsa.class = generic
		alsa.subclass = generic-mix
		alsa.name = "Intel\ 82801AA-ICH"
		alsa.id = "Intel\ ICH"
		alsa.subdevice = 0
		alsa.subdevice_name = "subdevice\ \#0"
		alsa.device = 0
		alsa.card = 0
		alsa.card_name = "Intel\ 82801AA-ICH"
		alsa.long_card_name = "Intel\ 82801AA-ICH\ with\ AD1980\ at\ irq\ 21"
		alsa.driver_name = snd_intel8x0
		device.bus_path = pci-0000:00:05.0
		sysfs.path = /devices/pci0000:00/0000:00:05.0/sound/card0
		device.bus = pci
		device.vendor.id = 8086
		device.vendor.name = "Intel\ Corporation"
		device.product.id = 2415
		device.product.name = "82801AA\ AC\'97\ Audio\ Controller"
		device.form_factor = internal
		device.string = front:0
		device.buffering.buffer_size = 17632
		device.buffering.fragment_size = 4408
		device.access_mode = mmap
		device.profile.name = analog-stereo
		device.profile.description = "Analog\ Stereo"
		device.description = "Built-in\ Audio\ Analog\ Stereo"
		alsa.mixer_name = "Analog\ Devices\ AD1980"
		alsa.components = AC97a:41445370
		module-udev-detect.discovered = 1
		device.icon_name = audio-card-pci
	gst-launch-1.0 pulsesrc device=alsa_input.pci-0000_00_05.0.analog-stereo ! ...


Device found:

	name  : Built-in Audio Analog Stereo
	class : Audio/Sink
	caps  : audio/x-raw, format=(string){ S16LE, S16BE, F32LE, F32BE, S32LE, S32BE, S24LE, S24BE, S24_32LE, S24_32BE, U8 }, layout=(string)interleaved, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-alaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	        audio/x-mulaw, rate=(int)[ 1, 2147483647 ], channels=(int)[ 1, 32 ];
	properties:
		alsa.resolution_bits = 16
		device.api = alsa
		device.class = sound
		alsa.class = generic
		alsa.subclass = generic-mix
		alsa.name = "Intel\ 82801AA-ICH"
		alsa.id = "Intel\ ICH"
		alsa.subdevice = 0
		alsa.subdevice_name = "subdevice\ \#0"
		alsa.device = 0
		alsa.card = 0
		alsa.card_name = "Intel\ 82801AA-ICH"
		alsa.long_card_name = "Intel\ 82801AA-ICH\ with\ AD1980\ at\ irq\ 21"
		alsa.driver_name = snd_intel8x0
		device.bus_path = pci-0000:00:05.0
		sysfs.path = /devices/pci0000:00/0000:00:05.0/sound/card0
		device.bus = pci
		device.vendor.id = 8086
		device.vendor.name = "Intel\ Corporation"
		device.product.id = 2415
		device.product.name = "82801AA\ AC\'97\ Audio\ Controller"
		device.form_factor = internal
		device.string = front:0
		device.buffering.buffer_size = 19188
		device.buffering.fragment_size = 6396
		device.access_mode = mmap
		device.profile.name = analog-stereo
		device.profile.description = "Analog\ Stereo"
		device.description = "Built-in\ Audio\ Analog\ Stereo"
		alsa.mixer_name = "Analog\ Devices\ AD1980"
		alsa.components = AC97a:41445370
		module-udev-detect.discovered = 1
		device.icon_name = audio-card-pci
	gst-launch-1.0 ... ! pulsesink device=alsa_output.pci-0000_00_05.0.analog-stereo


Device found:

	name  : e-CAM83_USB
	class : Video/Source
	caps  : video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)3840, height=(int)2160, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction){ 30/1, 15/1 };
	        video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1;
	properties:
		udev-probed = true
		device.bus_path = pci-0000:00:0c.0-usb-0:2:1.0
		sysfs.path = /sys/devices/pci0000:00/0000:00:0c.0/usb1/1-2/1-2:1.0/video4linux/video0
		device.bus = usb
		device.subsystem = video4linux
		device.vendor.id = 2560
		device.vendor.name = e-ConSystems
		device.product.id = c184
		device.product.name = e-CAM83_USB
		device.serial = e-ConSystems_e-CAM83_USB_00.00.01
		device.capabilities = :capture:
		device.api = v4l2
		device.path = /dev/video0
		v4l2.device.driver = uvcvideo
		v4l2.device.card = e-CAM83_USB
		v4l2.device.bus_info = usb-0000:00:0c.0-2
		v4l2.device.version = 328933 (0x000504e5)
		v4l2.device.capabilities = 2225078273 (0x84a00001)
		v4l2.device.device_caps = 69206017 (0x04200001)
	gst-launch-1.0 v4l2src ! ...


Device found:

	name  : e-CAM83_USB
	class : Video/Source
	caps  : video/x-raw, format=(string)YUY2, width=(int)640, height=(int)480, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)15/1;
	        image/jpeg, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)30/1;
	properties:
		udev-probed = true
		device.bus_path = pci-0000:00:0c.0-usb-0:2:1.0
		sysfs.path = /sys/devices/pci0000:00/0000:00:0c.0/usb1/1-2/1-2:1.0/video4linux/video2
		device.bus = usb
		device.subsystem = video4linux
		device.vendor.id = 2560
		device.vendor.name = e-ConSystems
		device.product.id = c184
		device.product.name = e-CAM83_USB
		device.serial = e-ConSystems_e-CAM83_USB_00.00.01
		device.capabilities = :capture:
		device.api = v4l2
		device.path = /dev/video2
		v4l2.device.driver = uvcvideo
		v4l2.device.card = e-CAM83_USB
		v4l2.device.bus_info = usb-0000:00:0c.0-2
		v4l2.device.version = 328933 (0x000504e5)
		v4l2.device.capabilities = 2225078273 (0x84a00001)
		v4l2.device.device_caps = 69206017 (0x04200001)
	gst-launch-1.0 v4l2src device=/dev/video2 ! ...

A simple video test will not work either.

voxl:~$ gst-launch-1.0 videotestsrc ! videoconvert ! autovideosink
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
WARNING: from element /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0: Resource not found.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/gst/autodetect/gstautodetect.c(347): gst_auto_detect_find_best (): /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0:
Failed to find a usable video sink
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
^Chandling interrupt.
Interrupt: Stopping pipeline ...
Execution ended after 0:00:17.998587815
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...

Are there any plugins that I could be missing?

Kris

Keeps failing to find a usable video sink.

voxl:~$ show-video-device-info.sh
/dev/video2: e-CAM83_USB 2560:c184
/dev/video3: e-CAM83_USB 2560:c184
voxl:~$ gst-launch-1.0 v4l2src device=/dev/video3 ! videoconvert ! autovideosink
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
WARNING: from element /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0: Resource not found.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/gst/autodetect/gstautodetect.c(347): gst_auto_detect_find_best (): /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0:
Failed to find a usable video sink
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not open device '/dev/video3' for reading and writing.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/sys/v4l2/v4l2_calls.c(625): gst_v4l2_open (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
system error: Device or resource busy
Setting pipeline to NULL ...
Freeing pipeline ...
voxl:~$ gst-launch-1.0 v4l2src device=/dev/video2 ! videoconvert ! autovideosink
Setting pipeline to PAUSED ...
ERROR: Pipeline doesn't want to pause.
WARNING: from element /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0: Resource not found.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/gst/autodetect/gstautodetect.c(347): gst_auto_detect_find_best (): /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0:
Failed to find a usable video sink
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not open device '/dev/video2' for reading and writing.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/sys/v4l2/v4l2_calls.c(625): gst_v4l2_open (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
system error: Device or resource busy
Setting pipeline to NULL ...
Freeing pipeline ...
voxl:~$

Output when debug command is used.

voxl:~$ GST_DEBUG=3 gst-launch-1.0 v4l2src device=/dev/video3 ! videoconvert ! autovideosink
Setting pipeline to PAUSED ...
0:00:00.229741613  4689    0xdf500 WARN              autodetect gstautodetect.c:347:gst_auto_detect_find_best:<autovideosink0> warning: Failed to find a usable video sink
0:00:00.277135238  4689    0xdf500 WARN                    v4l2 v4l2_calls.c:625:gst_v4l2_open:<v4l2src0> error: Could not open device '/dev/video3' for reading and writing.
0:00:00.277213207  4689    0xdf500 WARN                    v4l2 v4l2_calls.c:625:gst_v4l2_open:<v4l2src0> error: system error: Device or resource busy
ERROR: Pipeline doesn't want to pause.
WARNING: from element /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0: Resource not found.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/gst/autodetect/gstautodetect.c(347): gst_auto_detect_find_best (): /GstPipeline:pipeline0/GstAutoVideoSink:autovideosink0:
Failed to find a usable video sink
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not open device '/dev/video3' for reading and writing.
Additional debug info:
/opt/workspace/build/apq8096-le-1-0-1_ap_standard_oem.git/apps_proc/poky/build/tmp-glibc/work/armv7a-vfp-neon-oemllib32-linux-gnueabi/lib32-gstreamer1.0-plugins-good/1.10.4-r0/gst-plugins-good-1.10.4/sys/v4l2/v4l2_calls.c(625): gst_v4l2_open (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
system error: Device or resource busy
Setting pipeline to NULL ...
Freeing pipeline ...

tom

@Kris You can't use autovideosink on VOXL because it doesn't have a display

Eric Katzfey

@Kris Maybe try fakesink instead?

Kris

@Eric-Katzfey
I have tried both fakesink and playbin.
Neither of them work either.
Has anyone gotten gstreamer to successfully work on VOXL1?