Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
Collapse
Brand Logo

ModalAI Forum

  1. ModalAI Support Forum
  2. Development Drones
  3. Power issues at the initial startup

Power issues at the initial startup

Scheduled Pinned Locked Moved Unsolved Development Drones
3 Posts 3 Posters 109 Views 1 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • M Offline
    M Offline
    mmirtaba
    wrote last edited by
    #1

    Hardware: Starling 2 Max order number 8701

    Software version: (paste the output of voxl-version)

    Configuration / services: (paste the output of voxl-inspect-services)

    What I am trying to do: Initial setup, driver installation

    What actually happens: Today, I attempted the initial setup and driver installation of the Starling Max 2 drone by following the user manual, which provides two connection methods: Wi-Fi and USB-C. Since the desktop computer did not have a Wi-Fi module, I chose the USB-C method. I first connected the batteries, and the drone started normally with its LEDs lighting up. I then connected the drone to the desktop using a USB-C cable. While searching for the required drivers, I noticed a burning smell and found that the drone had become extremely hot. I immediately disconnected both the USB-C cable and the batteries to prevent further damage.

    Steps to reproduce:

    Logs / pictures: (attach files; PX4 logs -> https://logs.px4.io)

    VinnyV 1 Reply Last reply
    0
    • M mmirtaba

      Hardware: Starling 2 Max order number 8701

      Software version: (paste the output of voxl-version)

      Configuration / services: (paste the output of voxl-inspect-services)

      What I am trying to do: Initial setup, driver installation

      What actually happens: Today, I attempted the initial setup and driver installation of the Starling Max 2 drone by following the user manual, which provides two connection methods: Wi-Fi and USB-C. Since the desktop computer did not have a Wi-Fi module, I chose the USB-C method. I first connected the batteries, and the drone started normally with its LEDs lighting up. I then connected the drone to the desktop using a USB-C cable. While searching for the required drivers, I noticed a burning smell and found that the drone had become extremely hot. I immediately disconnected both the USB-C cable and the batteries to prevent further damage.

      Steps to reproduce:

      Logs / pictures: (attach files; PX4 logs -> https://logs.px4.io)

      VinnyV Offline
      VinnyV Offline
      Vinny
      ModalAI Team
      wrote last edited by
      #2

      Hi @mmirtaba,

      Sorry for the slow reply. Disconnecting the USB-C cable and the batteries right away was the right call.

      Please do not power the drone again, from the batteries or from USB. Open an RMA here and reference order 8701: https://www.modalai.com/pages/rma

      Every Starling 2 Max is flight tested before it ships. So we can start looking into it before the unit arrives, please reply here with:

      • Photos of the drone, including any part that looks discolored or damaged
      • Where the heat and the smell seemed to come from, if you noticed
      • Which port on the drone the USB-C cable was plugged into, and what it connected to on the desktop (a USB-C port, or a USB-A port through an adapter)
      • Which operating system the desktop runs, and what "searching for the required drivers" involved (for example a Windows pop-up, Device Manager, or downloading something)
      • Roughly how long the drone was running on batteries before you plugged in the USB-C cable
      • Roughly how long after plugging in the cable you noticed the smell
      1 Reply Last reply
      0
      • J Offline
        J Offline
        johnscott
        wrote last edited by
        #3

        One detail worth adding to Vinny's list: whether the desktop port can itself supply power. Plenty of USB-C ports, and PD chargers or cables, will push 5V or more into the board, and on designs where the battery input and USB input share a power path, that contention is a plausible place for heat to build near the connector. Mentioning it in the RMA may help them check the right area first.

        1 Reply Last reply
        0

        Reading along? Create a free ModalAI Forum account to join in.

        With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.

        Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.

        Register Login
        Reply
        • Reply as topic
        Log in to reply
        • Oldest to Newest
        • Newest to Oldest
        • Most Votes


        ModalAI
        Categories Recent Tags ModalAI.com Docs
        © 2026 ModalAI® · Accelerating autonomy for smaller, smarter, safer drones · Powered by NodeBB
        • Login

        • Don't have an account? Register

        • Login or register to search.
        • First post
          Last post
        0
        • Categories
        • Recent
        • Tags
        • Popular
        • Users
        • Groups