Preflight Fail: Compass Sensor 0 missing
-
@Nitin-Varma-Vegesna None
-
@Nitin-Varma-Vegesna I think it's this one: https://store.3dr.com/mini-gps-ublox-max-m10s/
-
@Eric-Katzfey Ok, thank you!
-
@Eric-Katzfey Now, it arms successfully, even though it says Preflight Fail: heading estimate not stable and Preflight Fail: Yaw estimate error. Is this an issue?
-
@Nitin-Varma-Vegesna If you are just flying in manual or altitude hold modes then those shouldn't be an issue.
-
This post is deleted! -
This post is deleted! -
@Eric-Katzfey What about autonomous control indoors, and how could that be fixed if it's an issue? This is with a new GPS as well. Do I have to configure anything? Also, for the EKF2_GPS_CTRL, I reset to default: 7
-
Here is an image of when I start autonomous exploration (not flying yet) but moving it with hand, I am getting these preflight errors that I used to not get.
This is with SYS_HAS_GPS, and SYS_HAS_MAG to 1, EKF2_MAG_TYPE = Automatic, EKF2_GPS_CTRL = 7
Also, voxl-inspect-gps is saying NO GPS for fix type:
dt(ms) |fix type|Sats|Latitude(deg)|Longitude(deg)| Alt(m) |Vel(m/s)|HorErr(m)|AltErr(m)|
129.5 | NO GPS | 0 | 0.0000000 | 0.0000000 | -17.0 | 0.00 | 4294967.295 | 4092465.408 |^C -
@Nitin-Varma-Vegesna If you re-install or update your SDK to the latest it will properly set all of the parameters.
