voxl-camera-server behaving differently
-
I ran the voxl-vision-hub for the first time, installed ROS and ran voxl-configure-mpa.
After running those commands, the command:voxl-camera-server -lnow only returns this:
==================================== Number of cameras detected: 1 ====================================instead of the longer information output that is shown in the documentation docs. It also causes the camera to not work in the portal anymore until I just run voxl-camera-server.
I also found that all the servers listed underneath the voxl-vision-hub as requirements are found, except for the apriltag-server. How do i get the apriltag server running?
-
I ran the voxl-vision-hub for the first time, installed ROS and ran voxl-configure-mpa.
After running those commands, the command:voxl-camera-server -lnow only returns this:
==================================== Number of cameras detected: 1 ====================================instead of the longer information output that is shown in the documentation docs. It also causes the camera to not work in the portal anymore until I just run voxl-camera-server.
I also found that all the servers listed underneath the voxl-vision-hub as requirements are found, except for the apriltag-server. How do i get the apriltag server running?
-
It looks like this issue was only in the SDK 1.4.4 . Other SDK releases should be OK. A bug in the printing function in
libmodal-journallibrary caused the prints to stop showing up.Alex
-
This worked. Thank you.
However, one thing I still cannot find is the apriltag-server. It is listed as a requirement on the voxl-vision-hub. When I try to start the server, I am told it could not be found, and I also cannot find an apriltag-server in the other documentation pages about relocalization and apriltags.
-
This worked. Thank you.
However, one thing I still cannot find is the apriltag-server. It is listed as a requirement on the voxl-vision-hub. When I try to start the server, I am told it could not be found, and I also cannot find an apriltag-server in the other documentation pages about relocalization and apriltags.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login