Hardcoded IP in voxl-streamer
-
Was trying to debug some video streaming and noticed voxl-streamer providing the same output "stream available at rtsp://127.0.0.1" no matter what I set default_uri to, or with auto_ip true or false. I went to look at where that logic was in voxl-streamer and noticed it is hardcoded Is there an easy way to change that and get a more accurate information? Or does ModalAI have to change, recompile, then push in a new SDK?
-
Was trying to debug some video streaming and noticed voxl-streamer providing the same output "stream available at rtsp://127.0.0.1" no matter what I set default_uri to, or with auto_ip true or false. I went to look at where that logic was in voxl-streamer and noticed it is hardcoded Is there an easy way to change that and get a more accurate information? Or does ModalAI have to change, recompile, then push in a new SDK?
@groupo , you are correct, the printout is hardcoded, but the application will respond to the actual board ip, which you can get using
ifconfigcommand.I'll see if i can fix it so that
voxl-streamerreports the actual ip instead of the127.0.0.1which is the address for the local (loopback) interface on the board (a virtual network for local networking within the board)Alex
-
@groupo , you are correct, the printout is hardcoded, but the application will respond to the actual board ip, which you can get using
ifconfigcommand.I'll see if i can fix it so that
voxl-streamerreports the actual ip instead of the127.0.0.1which is the address for the local (loopback) interface on the board (a virtual network for local networking within the board)Alex
@Alex-Kushleyev The actual board may have many IPs, such as if wifi and modem are connected. It's my understanding it will use voxl-my-ip if auto_ip is True in mavcam-manager.conf, but if set to false it will select whatever default_uri is. I was trying to find a way to confirm that is in fact the the case. I did determine the issue was in VLC and solved it in another user's recent post.
In that post I did ask how mavcam-manger and streamer are coupled. From the block diagram on the docs, they appeared to be decoupled but its clear streamer relies on things set in mavcam-manager
-
@Alex-Kushleyev The actual board may have many IPs, such as if wifi and modem are connected. It's my understanding it will use voxl-my-ip if auto_ip is True in mavcam-manager.conf, but if set to false it will select whatever default_uri is. I was trying to find a way to confirm that is in fact the the case. I did determine the issue was in VLC and solved it in another user's recent post.
In that post I did ask how mavcam-manger and streamer are coupled. From the block diagram on the docs, they appeared to be decoupled but its clear streamer relies on things set in mavcam-manager
-
@tom @Alex-Kushleyev thank you both. Hopefully there is a way to illustrate how mavcam manager, streamer, and camera server are all related. Maybe I am relying on the block diagram too heavily but it has been very confusing for me.
What steps would I need to take if I wanted to make those changes instead of waiting for an SDK update? I don’t necessarily need the behavior now that I have confirmed everything is working. But there are a few things for my very specific use case that could eliminate some hoops I have to jump through on my system. As Tom and I have discussed before, we’ve had to muddle our way through a few issues that weren’t part of your majority of use cases.
I assume this would involve building basically my own SDK (yours with very minor edits) then flashing it to the drone? Is that even possible?
-
What steps would I need to take if I wanted to make those changes instead of waiting for an SDK update? I don’t necessarily need the behavior now that I have confirmed everything is working. But there are a few things for my very specific use case that could eliminate some hoops I have to jump through on my system. As Tom and I have discussed before, we’ve had to muddle our way through a few issues that weren’t part of your majority of use cases.
I assume this would involve building basically my own SDK (yours with very minor edits) then flashing it to the drone? Is that even possible?
-
@groupo yes all the code is open sourced for this exact purpose - if you wish to make updates, you can fork your own instance of the repository - make your edits, compile, flash the deb onto your voxl2 and then provided everythign works as expected you can make an MR on gitlab from your fork to the dev branch and one of us will review and test prior to adding into the next release.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login