Connecting USB drive to Voxl2 mini J9 connector.
-
Good morning. Looking in the documentation I see mention on using the J9 connector as a secondary HOST port.
My plan is to use one of the UARTs as a tty to access the device using a shell to debug our software and/or to toggle between HOST mode and the default mode.
What I can't find is a tutorial or specific steps I need to take to be able to change the port into HOST mode and back to peripheral mode. In particular:
- Software/configuration changes needed to change to HOST mode?
- Some documentation mentions needing to use special cables, while others do not.
Any examples would be fantastic.
Thanks,
Brendon. -
VOXL 2 Mini USB OTG negotiates automatically. There should not be a special cable required for VOXL 2 Mini
VOXL 1 required a special cable and VOXL 2 OTG does not currently work
-
VOXL 2 Mini USB OTG negotiates automatically. There should not be a special cable required for VOXL 2 Mini
VOXL 1 required a special cable and VOXL 2 OTG does not currently work
@Moderator Thank you, that is fantastic news, and makes my life a lot easier.
-
VOXL 2 Mini USB OTG negotiates automatically. There should not be a special cable required for VOXL 2 Mini
VOXL 1 required a special cable and VOXL 2 OTG does not currently work
@Moderator Can you take a look at my new post.
I can see that the mount command in syslog. No errors, but the mounted file system doesn't show up.Thanks,
Brendon.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login