Connecting USB drive to Voxl2 mini J9 connector.
-
Good morning. Looking in the documentation I see mention on using the J9 connector as a secondary HOST port.
My plan is to use one of the UARTs as a tty to access the device using a shell to debug our software and/or to toggle between HOST mode and the default mode.
What I can't find is a tutorial or specific steps I need to take to be able to change the port into HOST mode and back to peripheral mode. In particular:
- Software/configuration changes needed to change to HOST mode?
- Some documentation mentions needing to use special cables, while others do not.
Any examples would be fantastic.
Thanks,
Brendon. -
VOXL 2 Mini USB OTG negotiates automatically. There should not be a special cable required for VOXL 2 Mini
VOXL 1 required a special cable and VOXL 2 OTG does not currently work
-
VOXL 2 Mini USB OTG negotiates automatically. There should not be a special cable required for VOXL 2 Mini
VOXL 1 required a special cable and VOXL 2 OTG does not currently work
@Moderator Thank you, that is fantastic news, and makes my life a lot easier.
-
VOXL 2 Mini USB OTG negotiates automatically. There should not be a special cable required for VOXL 2 Mini
VOXL 1 required a special cable and VOXL 2 OTG does not currently work
@Moderator Can you take a look at my new post.
I can see that the mount command in syslog. No errors, but the mounted file system doesn't show up.Thanks,
Brendon.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login