Sentinel flips during takeoff
-
@Eric-Katzfey Thank you for the fast response. Let us know because there is a bit of urgency to use the drone and there wont be enough time to procure another due to lead time. We currently have 3 new drone and plan to procure more but this is hindering us from doing so.
@stevedan Okay, understood. We are testing some new ESC firmware now and hope to have an update for you early next week.
-
@Eric-Katzfey Thank you for the fast response. Let us know because there is a bit of urgency to use the drone and there wont be enough time to procure another due to lead time. We currently have 3 new drone and plan to procure more but this is hindering us from doing so.
@stevedan We will need to walk you through the procedure to update the ESC firmware. In order to do that we need to know what software you have running on the drone now. Can you paste the output of
voxl-version? -
Service Name | Version | Enabled | Running | CPU Usage --------------------------------------------------------------------------- docker-autorun | 1.2.4 | Disabled | Not Running | docker-daemon | 1.2.4 | Disabled | Not Running | modallink-relink | 0.16.1 | Disabled | Not Running | voxl-camera-server | 1.3.5 | Enabled | Running | 116.7 voxl-cpu-monitor | 0.3.0 | Enabled | Running | 0.0 voxl-dfs-server | 0.1.0 | Disabled | Not Running | voxl-imu-server | 0.5.0 | Enabled | Running | 0.0 voxl-mavlink-server | 0.3.0 | Enabled | Running | 0.0 voxl-modem | 0.16.1 | Disabled | Not Running | voxl-portal | 0.5.0 | Enabled | Running | 5.6 voxl-px4-imu-server | 0.1.2 | Disabled | Not Running | voxl-px4 | 1.12.31 | Enabled | Running | 0.0 voxl-qvio-server | 0.8.2 | Enabled | Running | 27.8 voxl-remote-id | 0.0.5 | Disabled | Not Running | voxl-softap | 0.1.5 | Disabled | Not Running | voxl-static-ip | 0.1.5 | Disabled | Not Running | voxl-streamer | 0.4.1 | Enabled | Running | 0.0 voxl-tag-detector | 0.0.4 | Disabled | Not Running | voxl-tflite-server | 0.3.1 | Disabled | Not Running | voxl-time-sync | 1.2.2 | Disabled | Not Running | voxl-vision-px4 | 1.4.0 | Enabled | Running | 5.6 voxl-wait-for-fs | 1.2.2 | Enabled | Completed | -
@stevedan We will need to walk you through the procedure to update the ESC firmware. In order to do that we need to know what software you have running on the drone now. Can you paste the output of
voxl-version?@Eric-Katzfey Is it possible we can set a time that both of us are available to speed up the process given that your timezone is different from mine?. like 6pm spain time?
-
@Eric-Katzfey Is it possible we can set a time that both of us are available to speed up the process given that your timezone is different from mine?. like 6pm spain time?
@stevedan Would you be willing to just move to our latest software platform release to resolve this rather than trying to get new ESC firmware setup in the release that you have now? It is in beta but we can give you access to it and it should solve your flipping issue.
-
@Eric-Katzfey Is it possible we can set a time that both of us are available to speed up the process given that your timezone is different from mine?. like 6pm spain time?
@stevedan I sent you a link to the new platform release in email if you are interested in trying it out.
-
@stevedan I sent you a link to the new platform release in email if you are interested in trying it out.
-
@Eric-Katzfey I can test this release and see if it solves the problem. When would this release be officially out?.
@stevedan I depends on what kind of issues we find with it as we continue testing it. We're hopeful that it will be ready for official release in the next week.
-
@stevedan I depends on what kind of issues we find with it as we continue testing it. We're hopeful that it will be ready for official release in the next week.
@Eric-Katzfey Maybe you can help me fixed but the vio result on Qgroundcontrol is streaming at 1hz, and the reaction speed of the remote control on Qgroundcontrol is really bad. It reacts slow, is there something I am doing wrong
What is strange is that from the drone, the vio data ms is fine voxl2:~$ voxl-inspect-qvio
waiting for serverdt(ms) | T_imu_wrt_vio (m) |Roll Pitch Yaw (deg)|features|quality| state| error_codes |
29.3 | -0.00 -0.00 -0.00| -0.0 0.0 0.0| 28 | 27% | OKAY | ^C -
@Eric-Katzfey Maybe you can help me fixed but the vio result on Qgroundcontrol is streaming at 1hz, and the reaction speed of the remote control on Qgroundcontrol is really bad. It reacts slow, is there something I am doing wrong
What is strange is that from the drone, the vio data ms is fine voxl2:~$ voxl-inspect-qvio
waiting for serverdt(ms) | T_imu_wrt_vio (m) |Roll Pitch Yaw (deg)|features|quality| state| error_codes |
29.3 | -0.00 -0.00 -0.00| -0.0 0.0 0.0| 28 | 27% | OKAY | ^C@Eric-Katzfey This is a video of what I mean-> https://drive.google.com/drive/folders/122cPZ1S3Z_gP0yo8nipRGJHqpJTSj9c3?usp=sharing
-
@Eric-Katzfey This is a video of what I mean-> https://drive.google.com/drive/folders/122cPZ1S3Z_gP0yo8nipRGJHqpJTSj9c3?usp=sharing
@stevedan Sorry, but could you start a new forum thread for this new issue?
-
@Eric-Katzfey This is a video of what I mean-> https://drive.google.com/drive/folders/122cPZ1S3Z_gP0yo8nipRGJHqpJTSj9c3?usp=sharing
@stevedan Can you tell if the new software release fixed the motor not spinning issue or do you need to resolve the new issue before you can test?
-
@stevedan Can you tell if the new software release fixed the motor not spinning issue or do you need to resolve the new issue before you can test?
@Eric-Katzfey i would love to solve that issue first but it seems that the fact that the telemetry is low was done intentionally. I will stress test the drone on Tuesday when i go back to the office and give feedback. Although with the new code during arming the motors spins way smoother compared to before and doesn't do what happens before. I will stress test and let you know.
-
@stevedan Okay, understood. We are testing some new ESC firmware now and hope to have an update for you early next week.
-
@Eric-Katzfey Does this version work with mavros, is there any specific detting to enable the ise of mavros?
@stevedan Happy to hear that the new software fixed the motor issue! As for the new question, can you please open that up as a new forum topic? Thanks!
-
@stevedan Happy to hear that the new software fixed the motor issue! As for the new question, can you please open that up as a new forum topic? Thanks!
-
@Eric-Katzfey For now, it seems that the problem is solved because during arming the drone spins faster and smother, if anything occur I will let you know. Thanks for the support.
@stevedan Excellent, thanks for letting us know!
-
@stevedan Excellent, thanks for letting us know!
-
@stevedan Excellent, thanks for letting us know!
@Eric-Katzfey I am having issue with the new image, it seems like when I am running a docker and I reset for exampe a ros node inside the docker, after doing it 2 times, the whole ubuntu shuts down. In order to acces it I have to unplug and plug the drone to the batteries and then it works. Do you know what could possible be the problem to this. I monitored the dockers stats and the cpu usage is 80% of one core and the memory usage is like 1.16%, which is not that high. This only happens on the sentinel.
-
@Eric-Katzfey I am having issue with the new image, it seems like when I am running a docker and I reset for exampe a ros node inside the docker, after doing it 2 times, the whole ubuntu shuts down. In order to acces it I have to unplug and plug the drone to the batteries and then it works. Do you know what could possible be the problem to this. I monitored the dockers stats and the cpu usage is 80% of one core and the memory usage is like 1.16%, which is not that high. This only happens on the sentinel.
@stevedan No, we have not encountered that. But can you open this up in a new thread so that it has an appropriate title? Thanks!
-
S stevedan referenced this topic on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login