Re: open-vins mask file location
Dear All,
Regarding the previous post of @Jeremy-Frederick I'm still being unable to find the Open-VINS mask file location to apply different masks to each camera.
Can you comment on that?
Thank you in advance.
Best Regards,
Jacob
Re: Neopixel GPIO control on VOXL2 SPI port
Hello all,
We have been trying to integrate Neopixel on io_0 and io_3 in PX4 to control with "led_control" and, in case not possible, with voxl-send-neopixel-cmd.
However, with voxl-send-neopixel-cmd, we can't define color, just turn the RGB strip on or change the number of LEDs. When trying to use it on PX4 with "voxl-esc led -l 0x001", it does not run, due to the modal_io_bridge priority.
system-image 1.7.8-M0054-14.1a-perf
hx platform: M0054 1.0.0
voxl-suite:1.3.2
Thank you in advance for any help!
Regards,
Jacob
Hello @wilkinsaf,
Do you know where I can find that integration/implementation for color output on the AR 0144?
Thank you!
Regards,
Jacob
Re: open-vins mask file location
Dear All,
Regarding the previous post of @Jeremy-Frederick I'm still being unable to find the Open-VINS mask file location to apply different masks to each camera.
Can you comment on that?
Thank you in advance.
Best Regards,
Jacob
Thank you for the clarification!
We will change the service and see if it meets our needs.
Regards,
Jacob
Re: Neopixel GPIO control on VOXL2 SPI port
Hello all,
We have been trying to integrate Neopixel on io_0 and io_3 in PX4 to control with "led_control" and, in case not possible, with voxl-send-neopixel-cmd.
However, with voxl-send-neopixel-cmd, we can't define color, just turn the RGB strip on or change the number of LEDs. When trying to use it on PX4 with "voxl-esc led -l 0x001", it does not run, due to the modal_io_bridge priority.
system-image 1.7.8-M0054-14.1a-perf
hx platform: M0054 1.0.0
voxl-suite:1.3.2
Thank you in advance for any help!
Regards,
Jacob