M0022 PWM Breakout Board: 8-Channel Output Pinout
-
Hardware: (board / drone / SKU, serial # if you have it): VOXL 2 IO (M0065) and M0022 PWM Breakout Board (Rev A, as shown in the diagram)
Software version: (paste the output of
voxl-version)Configuration / services: (paste the output of
voxl-inspect-services)What I am trying to do:
: I’m reviewing the wiring diagram that shows the M0022 PWM Breakout Board connected to the 10-pin J1 connector on the M0065. The PWM output header on the M0022 appears to have eight columns of three pins each.Could you confirm whether each column corresponds to one PWM channel and contains a PWM signal pin, a power pin, and a ground pin? If so, could you confirm the pin order within each column and which column corresponds to each channel (PWM 1–8)?
Are the power and ground pins shared across all eight columns? Is the power rail supplied through the M0065 J1 connector, or does it require an external supply?

What actually happens: (error messages, behavior)Steps to reproduce:
Logs / pictures: (attach files; PX4 logs -> https://logs.px4.io)
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login