Replacement Starling 2 Max ToF Board
-
Hello,
I have reason to believe that I need to replace the ToF sensor on my drone. It has been getting inconsistent height estimates from that sensor, VIO says 1m and the ToF sensor says 0.01m, which has lead to the drone rising higher than desired. Additionally, looking at the ToF sensor there appears to be a discoloration on a portion of the sensor.
Where can I get a replacement Starling 2 Max ToF board?
-
@Myles-Levine , you can purchase the TOF sensor here : https://www.modalai.com/products/m0178?variant=48528287793456
-
@Alex-Kushleyev Thank you for the link, but none of those parts appear to be what is on my drone. It should be this board
https://docs.modalai.com/voxl2-mini-d0013/#flir-lepton
with this component
https://www.st.com/resource/en/datasheet/vl53l1x.pdf -
@Myles-Levine , sorry I thought you were referring to the other TOF sensor.
You will need a new M0187 board : https://docs.modalai.com/M0187/ . Please reach out to us via this form https://www.modalai.com/pages/contact-us , since we don't have that part available on the official page.
Is your Lepton sensor working properly?
Alex
-
@Alex-Kushleyev Thanks. I
suspect the sensor is broken. In QGC I can see the distance_sensor value not making sense, lower values for some things that are further away, etc. I tested it against a second drone, and those values made much more sense, so I believe the Lepton is broken.
Plus, there's a visible discoloration one of the lenses, about 1/3 of it looks green rather than amber.
