voxl-vision-hub sending unsolicited set_attitude messages
-
I have an external ArduPilot flight controller and when I enter Guided mode, my drone starts to descend and move as if it were given a target even though intended behavior is that it should just hold its position until given a target. Upon some digging, I think I've determined that somewhere in vision hub (version 1.8.17), the moment I enter guided mode I get a burst of SET_ATTITUDE_TARGET messages. I have open vins server turned off as well as voxl-px4 for what its worth. Any idea where and why this message may be getting sent?
-
I have an external ArduPilot flight controller and when I enter Guided mode, my drone starts to descend and move as if it were given a target even though intended behavior is that it should just hold its position until given a target. Upon some digging, I think I've determined that somewhere in vision hub (version 1.8.17), the moment I enter guided mode I get a burst of SET_ATTITUDE_TARGET messages. I have open vins server turned off as well as voxl-px4 for what its worth. Any idea where and why this message may be getting sent?
-
@bendraper Actually I think the message is SET_POSITION_TARGET_LOCAL_NED not SET_ATTITUDE
@bendraper Edit /etc/modalai/voxl-vision-hub.conf and set "offboard_mode": "off"
-
@bendraper Edit /etc/modalai/voxl-vision-hub.conf and set "offboard_mode": "off"
@Eric-Katzfey So I have a niche issue with that. I'm running a process on the Voxl that is utilizing the local port within vision hub because it is said in the voxl-mavlink-server conf file that you should expose a local port there as opposed to voxl-mavlink server. But now when i set offboard mode to off, my process is blocked off from that local port that is enabled within vision hub... any way you can see to resolve this?
-
@bendraper Edit /etc/modalai/voxl-vision-hub.conf and set "offboard_mode": "off"
-
@Eric-Katzfey This process is trying to send SET_POSITION_TARGET_LOCAL_NED by the way. Not sure if the act of setting offboard mode to OFF just blocks that message or something
@bendraper The code is open source. It is located here: https://gitlab.com/voxl-public/voxl-sdk/services/voxl-vision-hub/-/tree/dev?ref_type=heads. We encourage users to clone the repo and familiarize themselves with the code base. Did you try setting offboard_mode to off? Did it stop the SET_POSITION_TARGET_LOCAL_NED messages from being sent out?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login