Using an RTK GPS with the VOXL2
-
Hi,
I'd like to set up H-RTK ZED-F9P Ultralight GPS with RTK with the VOXL2. I'm planning to plug this into the VOXL's J19 port using the GPS unit's 6/8 (VCC, TX, RX, SCL, SDA, GND) pins into the VOXL's first 6 pins. Does this sound like it should work?
Thanks
-
Hi,
I'd like to set up H-RTK ZED-F9P Ultralight GPS with RTK with the VOXL2. I'm planning to plug this into the VOXL's J19 port using the GPS unit's 6/8 (VCC, TX, RX, SCL, SDA, GND) pins into the VOXL's first 6 pins. Does this sound like it should work?
Thanks
@alan123 , yes, the 12-pin connector on VOXL2 (J19) was designed such that the first 6 pins are compatible with a lot of existing GPS recevier modules. Please double check the pins and you should use a 12-pin connector to plug into VOXL2 (may need to re-pin your cable).
Alex
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login