Using an RTK GPS with the VOXL2
-
Hi,
I'd like to set up H-RTK ZED-F9P Ultralight GPS with RTK with the VOXL2. I'm planning to plug this into the VOXL's J19 port using the GPS unit's 6/8 (VCC, TX, RX, SCL, SDA, GND) pins into the VOXL's first 6 pins. Does this sound like it should work?
Thanks
-
Hi,
I'd like to set up H-RTK ZED-F9P Ultralight GPS with RTK with the VOXL2. I'm planning to plug this into the VOXL's J19 port using the GPS unit's 6/8 (VCC, TX, RX, SCL, SDA, GND) pins into the VOXL's first 6 pins. Does this sound like it should work?
Thanks
@alan123 , yes, the 12-pin connector on VOXL2 (J19) was designed such that the first 6 pins are compatible with a lot of existing GPS recevier modules. Please double check the pins and you should use a 12-pin connector to plug into VOXL2 (may need to re-pin your cable).
Alex
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login