Qualcomm SNPE Install and Setup
-
- Software: Suite 1.5.0, System image 1.8.04
- Hardware: Voxl2: TF-M0054-4-V1-C11
- Factory setup of default software
Hi all,
I need to get access to SNPE (Qulacomm's Neural Processing SDK) and was wondering if there is a guide or anyone has any advice getting the library setup on the Voxl2. Current releases of SNPE only support python3.10 and ubuntu 20.04 which these boards are not running. I managed to find a previous release (2.24) that is python3.6 based but still the later version of Ubuntu. Is this something that can be done or am I digging myself into a hole?Best,
Filip -
- Software: Suite 1.5.0, System image 1.8.04
- Hardware: Voxl2: TF-M0054-4-V1-C11
- Factory setup of default software
Hi all,
I need to get access to SNPE (Qulacomm's Neural Processing SDK) and was wondering if there is a guide or anyone has any advice getting the library setup on the Voxl2. Current releases of SNPE only support python3.10 and ubuntu 20.04 which these boards are not running. I managed to find a previous release (2.24) that is python3.6 based but still the later version of Ubuntu. Is this something that can be done or am I digging myself into a hole?Best,
Filip -
Anyone have any ideas in regards to this?
-
@fhaltmayer We're actively working on an SDK release with Ubuntu 20.04 however it is still a couple months out so not something that you'd be able to start working with today
-
@tom Do you have any tips/tricks for getting the SNPE working on the current build?
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login