Qualcomm SNPE Install and Setup
-
- Software: Suite 1.5.0, System image 1.8.04
- Hardware: Voxl2: TF-M0054-4-V1-C11
- Factory setup of default software
Hi all,
I need to get access to SNPE (Qulacomm's Neural Processing SDK) and was wondering if there is a guide or anyone has any advice getting the library setup on the Voxl2. Current releases of SNPE only support python3.10 and ubuntu 20.04 which these boards are not running. I managed to find a previous release (2.24) that is python3.6 based but still the later version of Ubuntu. Is this something that can be done or am I digging myself into a hole?Best,
Filip -
- Software: Suite 1.5.0, System image 1.8.04
- Hardware: Voxl2: TF-M0054-4-V1-C11
- Factory setup of default software
Hi all,
I need to get access to SNPE (Qulacomm's Neural Processing SDK) and was wondering if there is a guide or anyone has any advice getting the library setup on the Voxl2. Current releases of SNPE only support python3.10 and ubuntu 20.04 which these boards are not running. I managed to find a previous release (2.24) that is python3.6 based but still the later version of Ubuntu. Is this something that can be done or am I digging myself into a hole?Best,
Filip -
Anyone have any ideas in regards to this?
-
@fhaltmayer We're actively working on an SDK release with Ubuntu 20.04 however it is still a couple months out so not something that you'd be able to start working with today
-
@tom Do you have any tips/tricks for getting the SNPE working on the current build?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login