Swapping out RC Receiver
-
-
Hi devs, I'm working with a VOXL2 and wondering if I can easily swap out the "915 MHz ELRS" RC receiver and replace it with a "Nano RX|868MHz". I cannot work on 915 MHz due to some regulations forbidding the usage of that.
Thanks for any feedback.@buem799 If it uses CRSF on the UART then should be fine. Do you have a pointer to the data sheet for the exact receiver you are considering?
-
@buem799 If it uses CRSF on the UART then should be fine. Do you have a pointer to the data sheet for the exact receiver you are considering?
@Eric-Katzfey I couldn't find a datasheet apart from this site https://betafpv.com/collections/rx-tx/products/elrs-nano-receiver. I'm pretty sure it uses CRSF over UART since it also uses ELRS.
-
@Eric-Katzfey I couldn't find a datasheet apart from this site https://betafpv.com/collections/rx-tx/products/elrs-nano-receiver. I'm pretty sure it uses CRSF over UART since it also uses ELRS.
@buem799 Yes, I think that one should work fine. But there's probably a bunch of configuration options for the receiver so you have to make sure that it has been setup properly to do CRSF.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login