Swapping out RC Receiver
-
-
Hi devs, I'm working with a VOXL2 and wondering if I can easily swap out the "915 MHz ELRS" RC receiver and replace it with a "Nano RX|868MHz". I cannot work on 915 MHz due to some regulations forbidding the usage of that.
Thanks for any feedback.@buem799 If it uses CRSF on the UART then should be fine. Do you have a pointer to the data sheet for the exact receiver you are considering?
-
@buem799 If it uses CRSF on the UART then should be fine. Do you have a pointer to the data sheet for the exact receiver you are considering?
@Eric-Katzfey I couldn't find a datasheet apart from this site https://betafpv.com/collections/rx-tx/products/elrs-nano-receiver. I'm pretty sure it uses CRSF over UART since it also uses ELRS.
-
@Eric-Katzfey I couldn't find a datasheet apart from this site https://betafpv.com/collections/rx-tx/products/elrs-nano-receiver. I'm pretty sure it uses CRSF over UART since it also uses ELRS.
@buem799 Yes, I think that one should work fine. But there's probably a bunch of configuration options for the receiver so you have to make sure that it has been setup properly to do CRSF.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login