Skip to content
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
Collapse
Brand Logo

ModalAI Forum

  1. ModalAI Support Forum
  2. Ask your questions right here!
  3. M0125 vs M0151

M0125 vs M0151

Scheduled Pinned Locked Moved Ask your questions right here!
3 Posts 2 Posters 572 Views 1 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • B Offline
    B Offline
    bendraper
    Regular
    wrote on last edited by
    #1

    What are the differences between M0125 and M0151? I can't find any references to M0151 in the forums or technical docs.

    VinnyV 1 Reply Last reply
    0
    • B bendraper

      What are the differences between M0125 and M0151? I can't find any references to M0151 in the forums or technical docs.

      VinnyV Offline
      VinnyV Offline
      Vinny
      ModalAI Team
      wrote on last edited by
      #2

      Hi @bendraper
      M0151 is identical to M0125 in all ways except one...
      we added series USB caps on the SS lines on both TX and RX.
      This was due to the fact we normally include them on the Modem Board (M0090) and we realized that not everyone uses the Modem board, so we needed to make sure some other solution had them in there as well.
      If you were experiencing USB3 connection issues with M0125, M0151 should fix that issue.

      So now our only "gap" on including the series USB caps on SS lines is on VOXL 2 Mini as noted here:
      https://docs.modalai.com/voxl2-mini-connectors/#j3-usb-3-10-pin
      We do hope to spin that board in the next couple quarters, but no set time frame yet. Thankfully, most robotics use cases are more than satisfied with USB2.

      VinnyV 1 Reply Last reply
      0
      • VinnyV Vinny

        Hi @bendraper
        M0151 is identical to M0125 in all ways except one...
        we added series USB caps on the SS lines on both TX and RX.
        This was due to the fact we normally include them on the Modem Board (M0090) and we realized that not everyone uses the Modem board, so we needed to make sure some other solution had them in there as well.
        If you were experiencing USB3 connection issues with M0125, M0151 should fix that issue.

        So now our only "gap" on including the series USB caps on SS lines is on VOXL 2 Mini as noted here:
        https://docs.modalai.com/voxl2-mini-connectors/#j3-usb-3-10-pin
        We do hope to spin that board in the next couple quarters, but no set time frame yet. Thankfully, most robotics use cases are more than satisfied with USB2.

        VinnyV Offline
        VinnyV Offline
        Vinny
        ModalAI Team
        wrote on last edited by
        #3

        I want to add that M0125 is no longer being manufactured and we use M0151 as a direct substitute going forward. I'll try to have our product folks clarify the website for that.

        1 Reply Last reply
        0

        Hello! It looks like you're interested in this conversation, but you don't have an account yet.

        Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

        With your input, this post could be even better 💗

        Register Login
        Reply
        • Reply as topic
        Log in to reply
        • Oldest to Newest
        • Newest to Oldest
        • Most Votes


        ModalAI
        Categories Recent Tags ModalAI.com Docs
        © 2026 ModalAI® · Accelerating autonomy for smaller, smarter, safer drones · Powered by NodeBB
        • Login

        • Login or register to search.
        • First post
          Last post
        0
        • Categories
        • Recent
        • Tags
        • Popular
        • Users
        • Groups