Can't run voxl-qvio-server

[afdrus]

I am using stable release on voxl2, but I am not able to run voxl-qvio-server, despite the installation via apt and the binary is present in /usr/bin/ I get the following error:

voxl-qvio-server: error: No such file or directory

[tom]

@afdrus Are you able to run voxl-configure-qvio-server?

Can you post the output of voxl-version

[afdrus]

@tom Thanks for your reply!

here's the output of voxl-version:

--------------------------------------------------------------------------------
system-image: 1.4.1-M0054-14.1a-perf
kernel:       #1 SMP PREEMPT Thu Oct 13 17:48:16 UTC 2022 4.19.125
--------------------------------------------------------------------------------
hw version:   M0054
--------------------------------------------------------------------------------
voxl-suite:   0.9.5
--------------------------------------------------------------------------------
Packages:
Repo:  http://voxl-packages.modalai.com/ qrb5165 stable
Last Updated: 2023-06-19 10:19:04
List:
	libmodal-cv              0.2.3
	libmodal-exposure        0.0.7
	libmodal-journal         0.2.1
	libmodal-json            0.4.3
	libmodal-pipe            2.8.2
	libqrb5165-io            0.1.0
	libvoxl-cci-direct       0.1.5
	libvoxl-cutils           0.1.1
	qrb5165-dfs-server       0.1.0
	qrb5165-imu-server       0.5.0
	qrb5165-system-tweaks    0.1.5
	qrb5165-tflite           2.8.0-2
	voxl-bind                0.0.1
	voxl-camera-calibration  0.2.3
	voxl-camera-server       1.3.5
	voxl-ceres-solver        1.14.0-9
	voxl-cpu-monitor         0.3.0
	voxl-docker-support      1.2.4
	voxl-eigen3              3.4.0
	voxl-gphoto2-server      0.0.10
	voxl-jpeg-turbo          2.1.3-4
	voxl-libgphoto2          0.0.4
	voxl-libuvc              1.0.7
	voxl-logger              0.3.4
	voxl-mavlink             0.1.0
	voxl-mavlink-server      0.3.0
	voxl-modem               0.16.1
	voxl-mongoose            7.7.0-1
	voxl-mpa-to-ros          0.3.6
	voxl-mpa-tools           0.7.6
	voxl-opencv              4.5.5-1-202305271610
	voxl-portal              0.5.0
	voxl-px4                 1.12.31
	voxl-px4-imu-server      0.1.2
	voxl-qvio-server         0.8.2
	voxl-remote-id           0.0.5
	voxl-streamer            0.4.1
	voxl-suite               0.9.5
	voxl-tag-detector        0.0.4
	voxl-tflite-server       0.3.1
	voxl-utils               1.2.2
	voxl-uvc-server          0.1.3
	voxl-vision-px4          1.4.0
	voxl2-system-image       1.4.1-r0
	voxl2-wlan               1.0-r0
--------------------------------------------------------------------------------

output of bash: voxl-configure-qvio-server is the following:

bash: voxl-configure-qvio-server: command not found

[afdrus]

@tom
Also, I just noticed that, for some reasons, the interpreter which is needed to execute the binary file voxl-qvio-server (i.e. ld-linux.so.3) is missing (even though it should be in the /lib/ directory).

[tom]

@afdrus You can try reflashing the 0.9.5 SDK release to get back to a known good state. However, in general, voxl-qvio-server isn't really meant to be run manually through the command line.

Services on voxl are meant to be setup through configuration scripts, i.e.voxl-configure-mpa.

Then the status of the service can be checked with systemctl status voxl-qvio-server

[afdrus]

@tom Thank you for the reply. Is there any documentation where I can find how to reflash the 0.9.5 SDK release?
The output of the status of the service is the same even after re-configuring via voxl-configure-mpa

voxl2:/$ systemctl status voxl-qvio-server
● voxl-qvio-server.service - voxl-qvio-server
   Loaded: loaded (/usr/bin/voxl-qvio-server; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Fri 2023-06-23 09:38:50 UTC; 1min 0s ago
  Process: 1496 ExecStart=/usr/bin/voxl-qvio-server (code=exited, status=203/EXEC)
 Main PID: 1496 (code=exited, status=203/EXEC)

Jun 23 09:38:50 m0054 systemd[1]: Started voxl-qvio-server.
Jun 23 09:38:50 m0054 systemd[1496]: voxl-qvio-server.service: Failed to execute command: No such file or directory
Jun 23 09:38:50 m0054 systemd[1496]: voxl-qvio-server.service: Failed at step EXEC spawning /usr/bin/voxl-qvio-server: No such file or directory
Jun 23 09:38:50 m0054 systemd[1]: voxl-qvio-server.service: Main process exited, code=exited, status=203/EXEC
Jun 23 09:38:50 m0054 systemd[1]: voxl-qvio-server.service: Failed with result 'exit-code'.

[afdrus]

@tom nevermind I found out the documentation here, and by reflashing the platform everything worked again! Thank you for the support!