missing camera config ID - VOXL board on Seeker drone

[jon]

Hi, I just reflashed the VOXL board on a Seeker development drone to 0.9.5 or whatever the exact version of the latest release was. All the other services seem to run / enable
correctly, except voxl-camera-server throws up errors when I try to run and configure it.

Specifically, voxl-configure-cameras returns:

"missing camera config ID" and

voxl-camera-server returns:

"WARNING Failed to set priority, errno = 1
This may be because the FIFO scheduler is not available when running in a console.
It should work properly when run as a systemd background process on boot.
WARNING: failed to set scheduler"

As far as I know all the hardware on the drone should be functional, and this is right after a system image flash. Am I forgetting some part of the setup?

Thanks
-Jonathan

[Adrian Hidalgo]

@jonathankampia please run

voxl-configure-mpa -p -f seeker -b blue -c "(either 3 for hires, tracking, stereo or c7 for TOF, hires, stereo)" --fc yes 

[Adrian Hidalgo]

For the -c which is telling the Voxl board which cameras to expect, choose either 3 or 7 depending on your camera config.