ADB no device showing in terminal

[modaltb]

Hi @Sébastien-de-Pret-Roose-de-Calesberg ,

OK, so the installer is halting at:

        while [ "$(fastboot devices)" == "" ]
	do
		echo "[INFO] Waiting for fastboot..."
		sleep 2
	done

We somewhat recently moved from python to bash for the installer, and not tested on Ubuntu 20 at all.

Can we do one last check? and then I'l' get an email going to see what to do next.

Instead of using the install.sh script, can you just run fastboot devices from the terminal quickly after you bootup with the debug board attached with fastboot switch enabled?

Thanks for the patience.
-Travis

[Sébastien de Pret Roose de Calesberg]

Hi @modaltb,

Here is what is hapening wen i do the fastboot devices.

But should I install an other version of Ubuntu ? If so witchone ?

Thanks for the answear,
-Sébastien

[Chad Sweet]

See this thread on stack overflow, it might be helpful

https://stackoverflow.com/questions/53887322/adb-devices-no-permissions-user-in-plugdev-group-are-your-udev-rules-wrong

[Sébastien de Pret Roose de Calesberg]

hi @Chad-Sweet,

Thanks for your suggestion but it is the same thing describe in the ADB setup and it is already done, and the second part is not possible because we do not have the possibility to place the device in Transfer mode, or do we?

-Sébastien

[modaltb]

Hi @Sébastien-de-Pret-Roose-de-Calesberg ,

Sorry to beat this subject, and appreciate your patience, but we're trying to find root cause on these kind of issues.

What about running sudo fastboot devices instead of just 'fastboot devices'.

[Sébastien de Pret Roose de Calesberg]

Hi @modaltb,

Here is what came out of it.

And no problem, I know that this kind of thing take time.
Thanks for your answer.

[modaltb]

OK, how about this now:

• get the device to show up using sudo fastboot devices like above with the same method
• quickly thereafter, run sudo fastboot reboot to see if the device get's out of fastboot mode

If above works, this 'should' bring it out of fastboot mode if it's operational and if so, it should then show up running adb devices.

My hunch right now is, adb doesn't require require to be ran as sudo whereas fastboot does.

[Sébastien de Pret Roose de Calesberg]

Hi @modaltb,

So now it is stuck on this line

[modaltb]

@Sébastien-de-Pret-Roose-de-Calesberg ,

I'm trying out on more thing on my end, if it works I'll take a video of the process and share it and see if it works on your side.

If not I'll get an email out to you with next steps.

I have a hunch there's a small window (couple seconds) that we can communicate with the device, fingers crossed.

Thanks!

[modaltb]

Hey @Sébastien-de-Pret-Roose-de-Calesberg , I sent out a message to the email associated to this account.

Thanks!
Travis

[A Former User]

This post is deleted!

[Sébastien de Pret Roose de Calesberg]

Hello @modaltb,

It look like in the end I managed to reinstall the image on the board but the fastboot devices and adb shell does not work.

[modaltb]

Hi @Sébastien-de-Pret-Roose-de-Calesberg ,

I'll get an email going to this address on this account, I'm not clear what's going on and perhaps we need to send it in.

Thanks and sorry for the inconvenience,
Travis