Sentinel with VOXL2 connection to QGC reports firmware missing
-
Hi,
When I connect the Sentinel containing VOXL2 to QGC, it reports Parameters missing from firmware message. I have attached an image below for reference. Please advice on what to do in this case. Thanks!
-
What version of QGC are you using and what system image is on the VOXL2?
What version of parameters have you loaded? -
VOXL2 System Image: 1.2.1-M0054-14.1a-perf
QGC Version: 4.2.0
Version of Params: Have not messed with this since we got the drone. I have uploaded a params file provided by @RichieRich from this post - https://forum.modalai.com/topic/1091/sentinel-does-not-go-to-position-mode-during-outdoor-flight/3
Downloading the params file shows Version 1.4.11 Alpha. Image attached below.
-
@rohitpillai For this version, that is a known bug. You can ignore it since it doesn't effect the performance of the drone
-
Okay cool!
