QGC connection problem
-
We had the flight controller lose connection to the ESC's
To fix that I tried to redownload parameters.
We had multiple parameter download failures and now QGC cannot connect to the VOXLWe can see the board connect and add a comport, but is not recognized by QGC.
It says on pX4 that there is likely a problem with the hardware at the OS level. How do we fix that?
-
Please try loading new firmware and let us know if that works https://docs.modalai.com/flight-core-firmware/
-
This post is deleted!
-
Please try loading new firmware and let us know if that works https://docs.modalai.com/flight-core-firmware/
@Chad-Sweet That worked! After I did the reinstall, it would not connect. I closed and reopened QGC, switched the usb cable, and then went into the auto-connect section of the general settings and disabled the NMEA GPS device drop-down.
Thank you Chad!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login