QGC connection problem
-
We had the flight controller lose connection to the ESC's
To fix that I tried to redownload parameters.
We had multiple parameter download failures and now QGC cannot connect to the VOXLWe can see the board connect and add a comport, but is not recognized by QGC.
It says on pX4 that there is likely a problem with the hardware at the OS level. How do we fix that?
-
Please try loading new firmware and let us know if that works https://docs.modalai.com/flight-core-firmware/
-
This post is deleted!
-
Please try loading new firmware and let us know if that works https://docs.modalai.com/flight-core-firmware/
@Chad-Sweet That worked! After I did the reinstall, it would not connect. I closed and reopened QGC, switched the usb cable, and then went into the auto-connect section of the general settings and disabled the NMEA GPS device drop-down.
Thank you Chad!
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login