5G Add-on board - Accessing the Quectel module Linux Shell
-
I have a 5G Add on board (MSA-M0090-3-01-01) with a Quectel M.2 (RM502Q-AE) module connected to the VOXL 2 board. I can access the VOXL Linux shell with ADB to the VOXL2 USB-C connector. Is there a way to connect to the Linux LE shell on the RM502Q-AE module?
@Vinny - any suggestions? -
Not that we know about, sorry about that.
-
Hi @Mark-Lee ,
Chad is correct in that we have not tried it, but my idea is that if you wanted to access the Linux shell on the modem card, you would need a modem development platform from Quectel.
Here is an example I found online (please do your research to ensure this will work for you, but I do see they mention serial port access):
https://www.aliexpress.us/item/3256803611119964.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=USIn our architectures, we do have a mechanism to talk to the serial port over software using one of the QUPs, but there has been no need to do so, and would be a costly SW expense to develop it.
If you are willing to void your warranty (not recommended), I can show you which resistors have it and you could try to solder on to them, but you are better off with the Dev Kit IMHO.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login