Repairing M0138
-
Hardware: (board / drone / SKU, serial # if you have it)
M0138
Software version: (paste the output ofvoxl-version)
Python codes
Configuration / services: (paste the output ofvoxl-inspect-services)
Doesn't respond to USB uart
What happened:
I was connecting the M0138 to a 24V power supply for bench test. It turned on the led in the bootup sequence but afterwards stopped completely responding. I tried plugging it in and out but wouldn't start up again. Then I tried touching the components and the Vreg Inductor seems to be getting very hot, all other components seem fine. Is there a way to repair it? How would I do that? The purchase was made few months back and I don't want the ESC to scrap and want to make some use out of it.
ThanksLogs / pictures: (attach files; PX4 logs -> https://logs.px4.io)
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login