<![CDATA[Repairing M0138]]>Hardware: (board / drone / SKU, serial # if you have it)
M0138
Software version: (paste the output of voxl-version)
Python codes
Configuration / services: (paste the output of voxl-inspect-services)
Doesn't respond to USB uart
What happened:
I was connecting the M0138 to a 24V power supply for bench test. It turned on the led in the bootup sequence but afterwards stopped completely responding. I tried plugging it in and out but wouldn't start up again. Then I tried touching the components and the Vreg Inductor seems to be getting very hot, all other components seem fine. Is there a way to repair it? How would I do that? The purchase was made few months back and I don't want the ESC to scrap and want to make some use out of it.
Thanks

Logs / pictures: (attach files; PX4 logs -> https://logs.px4.io)

]]>https://forum.modalai.com/topic/5500/repairing-m0138RSS for NodeSat, 03 Oct 2026 23:24:28 GMTSat, 03 Oct 2026 05:51:04 GMT60