TOF sensor
-
Hey @Eric-Katzfey @Vinny
I would like to know whether i can cut out the semi circle extension. there is a cutting edge provided in the board. Is it safe to remove from that point
-
Hey @Eric-Katzfey @Vinny
I would like to know whether i can cut out the semi circle extension. there is a cutting edge provided in the board. Is it safe to remove from that pointHI @Jetson-Nano
Yes, absolutely. That was the way we designed it. Some customers need a mounting point, others do not care.
We refer to it as "M0178" when the mounting hole is present, and "M0171" when it is removed, hence the double markings.The edge there is v-scored, so just gently use a small pair of pliers or strong tweezers to remove that semi-circle, and check for burs (frays/splinters of laminate) and gently smooth it with any ESD safe method like a Kim-wipe or anything you have.
Thanks! -
HI @Jetson-Nano
Yes, absolutely. That was the way we designed it. Some customers need a mounting point, others do not care.
We refer to it as "M0178" when the mounting hole is present, and "M0171" when it is removed, hence the double markings.The edge there is v-scored, so just gently use a small pair of pliers or strong tweezers to remove that semi-circle, and check for burs (frays/splinters of laminate) and gently smooth it with any ESD safe method like a Kim-wipe or anything you have.
Thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login