VOXL ESC Mini 4-in-1 not detected issue
-
Hello,
I have a drone using a 5v VOXL ESC Mini 4-in-1 with Built-in Power Module with the voxl2 and I have run into an issue where after some use the ESC are not detected anymore by the voxl2. Sometimes, the I can run the commands described in https://gitlab.com/voxl-public/voxl-sdk/utilities/voxl-esc/-/blob/master/voxl-esc-tools/calibration.md to manually spin but I can no longer fly through QGC and the blue status light does not blink anymore. After some time though I could not even run the commands on the voxl either and I get a notice that no ESC is detected. The blue light still comes on and the voxl is powered through it so power is for sure going through. Anything to try or test to diagnose or get these working? Nothing should have changed in between them working and not working