doodle labs and joystick setup

Jetson Nano

@Eric-Katzfey Thank you for the support. I will test it out and get back to you encase of any further queries.

Jetson Nano

@Eric-Katzfey
I tested what you asked me, since i am using external Fc and doodle labs, I am not able to assign AUX to any button, is there any work around on how to assign AUX

Jetson Nano

@Eric-Katzfey @Alex-Kushleyev
hey guys, just a random thought, can I enable turtle mode through a button instead of taking AUX 1 into consideration. just a thought, any guidance and help would be greatly appreciated.

Eric Katzfey

@Jetson-Nano What do you see if you go to the MAVLink console in QGC and look at the manual_control_setpoint topic? (listener manual_control_setpoint)?

Eric Katzfey

@Eric-Katzfey Also, there is a parameter called VOXL_ESC_T_ON. How is that set? It determines which button will be used for turtle mode. The code is here: https://github.com/modalai/px4-firmware/blob/ea098200d3c09b7af548bf7be29fda245fad8f17/src/modules/mavlink/mavlink_receiver.cpp#L2083

Jetson Nano

@Eric-Katzfey
This is the output i am getting while running listener manual_control_setpoint

NuttShell (NSH) NuttX-11.0.0
nsh> listener manual_control_setpoint

TOPIC: manual_control_setpoint
 manual_control_setpoint
    timestamp: 438754659 (0.033455 seconds ago)
    timestamp_sample: 438754653 (6 us before timestamp)
    roll: 0.00000
    pitch: 0.00000
    yaw: 0.00000
    throttle: 0.00000
    flaps: 0.00000
    aux1: 0.00000
    aux2: 0.00000
    aux3: 0.00000
    aux4: 0.00000
    aux5: 0.00000
    aux6: 0.00000
    buttons: 0
    valid: True
    data_source: 2
    sticks_moving: False

nsh> listener manual_control_setpoint

TOPIC: manual_control_setpoint
 manual_control_setpoint
    timestamp: 446282690 (0.039850 seconds ago)
    timestamp_sample: 446282683 (7 us before timestamp)
    roll: 0.00000
    pitch: 0.00000
    yaw: 0.00000
    throttle: 0.00000
    flaps: 0.00000
    aux1: 0.00000
    aux2: 0.00000
    aux3: 0.00000
    aux4: 0.00000
    aux5: 0.00000
    aux6: 0.00000
    buttons: 0
    valid: True
    data_source: 2
    sticks_moving: False

Jetson Nano

@Eric-Katzfey I am not able to see the option you have mentioned VOXL_ESC_T_ON

Eric Katzfey

@Jetson-Nano said in doodle labs and joystick setup:

I am not able to see the option you have mentioned VOXL_ESC_T_ON

In the Mavlink console what do you see with "param show VOXL_ESC_*"?

And what about "ver all"?

Eric Katzfey

@Jetson-Nano said in doodle labs and joystick setup:

This is the output i am getting while running listener manual_control_setpoint

What is the parameter COM_RC_IN_MODE set to?

Jetson Nano

@Eric-Katzfey COM_RC_IN_MODE is set to joystick only