Low Latency IMX412 Driver
-
@Alex-Kushleyev I just tried upgrading from 1.2.0 to 1.4.1 and the installation script just hangs when I try to execute ./install.sh from my host computer. I am trying to run it from a Mac, but I am pretty sure I upgraded the SDK previously using the same computer. Let me know if you have any ideas. Thanks again!
-
@Matthew-Wellner , you are right. if the stream is disabled, its resolution will not affect the camera resolution. However, you requested the small stream to have resolution 1280x720 and the camera drivers for low latency do not have a native 1280x720@60 camera mode, so the pipeline selected the 4K60 or full frame 60fps, which was causing the issue. So the solution should be the same.
If you wanted to fix this, you should enable preview ("en_preview": true, "en_raw_preview": true) and you already have preview_widht / height set to 1936x1080 (and 60fps is available), so the pipeline will be forced to select 1936x1080@60, which should not have any issues.
You can confirm which camera mode was selected by the camera pipeline using instructions here : https://docs.modalai.com/camera-video/low-latency-video-streaming/#how-to-confirm-which-camera-resolution-was-selected-by-the-pipeline
Regarding the issue with updating SDK, i am not sure. Have you every done it before?
Alex
-
@Alex-Kushleyev Thanks! I was able to get the update working. I needed to replace the "./" in the script with "bash" and then everything worked flawlessly.
I am going through and setting things up after the update, but I will give the configuration change a try shortly. When I update to the low latency drivers, I just need to drop them in the /usr/lib/camera directory, right?
-
@Alex-Kushleyev One new error once I updated and reconfigured:
voxl-camera-server using new imx214 defaults ================================================================= configuration for 1 cameras: cam #0 name: hires sensor type: imx214 isEnabled: 1 camId: 1 camId2: -1 fps: 30 en_rotate: 0 en_rotate2: 0 en_preview: 0 pre_width: 640 pre_height: 480 en_raw_preview: 0 en_small_video: 1 small_video_width: 1024 small_video_height: 768 en_large_video: 1 large_video_width: 4096 large_video_height: 2160 en_misp: 0 misp_width: -1 misp_height: -1 en_snapshot: 1 snap_width: 4160 snap_height: 3120 exif_focal_length: 0.000000 exif_focal_len_35mm_format:0 exif_fnumber: 0.000000 ae_mode: isp msv_exposure_min_us: 20 msv_exposure_max_us: 33000 gain_min : 54 gain_max : 8000 standby_enabled: 0 decimator: 1 independent_exposure:0 fsync_en: 0 fsync_gpio: 109 ================================================================= thread is locked to cores: 4 5 6 7I tried with my old configuration as well, but all I am getting is the message "thread is locked to cores: 4 5 6 7". I am not sure how to fix this.
-
@Matthew-Wellner That isn't an error message. We manually set the cores voxl-camera-server is allowed to use in order to maximize performance
-
@tom - Thanks for the clarification.
I thought it was an error because the server just dies without any other message immediately after the thread locked message. I'll go through everything again to see if I am missing something.
-
@Alex-Kushleyev and @tom
I am getting the output below in logcat when I try and run the camera server. Did I miss a configuration / initialization step after updating the SDK?
04-23 15:26:17.186 16137 16137 I voxl-camera-server: /local/mnt/workspace/lnxbuild/project/trees_in_use/free_tree_dir/checkout/build-qti-distro-ubuntu-fullstack-perf/tmp-glibc/work/qrb5165_rb5-oe-linux/adsprpc/git-r1/adsprpc/src/fastrpc_apps_user.c:2329: fastrpc_apps_user_init done 04-23 15:26:17.186 16137 16137 V HAL : loaded HAL id=camera path=/usr/lib/hw/camera.qcom.so hmi=0x7f9653d0d0 handle=0x556a345410 04-23 15:26:17.186 16137 16137 I CamX : [CONFIG][HAL ] camxhal3module.cpp:392 HAL3Module() *************************************************** 04-23 15:26:17.186 16137 16137 I CamX : [CONFIG][HAL ] camxhal3module.cpp:393 HAL3Module() SHA1: 036a2d22fbaa18202ae206a6e464b9f46fcf83c9 04-23 15:26:17.186 16137 16137 I CamX : [CONFIG][HAL ] camxhal3module.cpp:394 HAL3Module() COMMITID: 04-23 15:26:17.186 16137 16137 I CamX : [CONFIG][HAL ] camxhal3module.cpp:395 HAL3Module() BUILD TS: 11/11/2024 22:13:22 04-23 15:26:17.186 16137 16137 I CamX : [CONFIG][HAL ] camxhal3module.cpp:396 HAL3Module() *************************************************** 04-23 15:26:17.187 16137 16137 I CamX : [ INFO][CORE ] camxoverridesettingsfile.cpp:390 Initialize() Opening override settings text file: /vendor/etc/camera/camxoverridesettings.txt 04-23 15:26:17.187 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.187 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.187 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.187 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.187 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.187 16137 16137 V CamX : [ VERB][CORE ] camxoverridesettingsfile.cpp:385 Initialize() Could not find override settings text file at: ./camxoverridesettings.txt 04-23 15:26:17.188 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found ...... 04-23 15:26:17.192 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.192 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.192 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.192 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.192 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.192 16137 16137 V CamX : [ VERB][UTILS ] camxhashmap.cpp:210 GetInPlace() Key not found 04-23 15:26:17.232 16137 16137 W CamX : [ WARN][CSL ] camxcslhwinternal.cpp:3050 CSLHwInternalFDIoctl() Ioctl failed for FD:5 with error reason Invalid argument 04-23 15:26:17.257 16137 16137 E : ChiAWBAlgorithmEntry 04-23 15:26:17.341 16137 16137 E CHIUSECASE: [ERROR ] chxutils.cpp:743 LibMap() Failed to load library libqti-perfd-client.so error libqti-perfd-client.so: cannot open shared object file: No such file or directory 04-23 15:26:17.341 16137 16137 E CHIUSECASE: [ERROR ] chxextensionmodule.cpp:301 ExtensionModule() Failed to load perf lib 04-23 15:26:17.345 16137 16137 I CamX : [CONFIG][CORE ] camxresourcemanager.cpp:61 Initialize() ResourceManager: 0x556a3b0dc0, name: CamXRealtimePipelineResourceManager 04-23 15:26:17.347 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 0 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.347 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.347 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 0 with error 8 04-23 15:26:17.347 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 1 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.347 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.347 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 1 with error 8 04-23 15:26:17.347 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 2 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.347 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.347 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 2 with error 8 04-23 15:26:17.348 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 3 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.348 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.348 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 3 with error 8 04-23 15:26:17.348 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 4 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.348 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.348 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 4 with error 8 04-23 15:26:17.348 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 5 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.348 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.348 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 5 with error 8 04-23 15:26:17.349 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 6 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.349 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.349 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 6 with error 8 04-23 15:26:17.350 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 7 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.350 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.350 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 7 with error 8 04-23 15:26:17.350 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 8 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.350 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.350 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 8 with error 8 04-23 15:26:17.350 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:513 ProbeSensor() Failed to Probe Sensor 9 error qmi_client_notifier_init() failed: qmi error (-17) 04-23 15:26:17.350 16137 16137 E CamX : [ERROR][NCS ] camxncsintfqsee.cpp:582 ProbeSensor() Unable to create lookup object, out of memory !! 04-23 15:26:17.351 16137 16137 W CamX : [ WARN][NCS ] camxncsintfqsee.cpp:246 GetListOfSensors() Probe sensor 9 with error 8 04-23 15:26:17.351 16137 16137 W CHIUSECASE: [WARN ] chxextensionmodule.cpp:1415 BuildLogicalCameraInfo() Please check if sensor id:0 is probed successfully! 04-23 15:26:17.351 16137 16137 W CHIUSECASE: [WARN ] chxextensionmodule.cpp:1415 BuildLogicalCameraInfo() Please check if sensor id:1 is probed successfully! 04-23 15:26:17.351 16137 16137 W CHIUSECASE: [WARN ] chxextensionmodule.cpp:1415 BuildLogicalCameraInfo() Please check if sensor id:2 is probed successfully! 04-23 15:26:17.351 16137 16137 W CHIUSECASE: [WARN ] chxextensionmodule.cpp:1415 BuildLogicalCameraInfo() Please check if sensor id:3 is probed successfully! 04-23 15:26:17.351 16137 16137 W CHIUSECASE: [WARN ] chxextensionmodule.cpp:1415 BuildLogicalCameraInfo() Please check if sensor id:4 is probed successfully! 04-23 15:26:17.351 16137 16137 W CHIUSECASE: [WARN ] chxextensionmodule.cpp:1415 BuildLogicalCameraInfo() Please check if sensor id:5 is probed successfully! 04-23 15:26:17.351 16137 16137 W CHIUSECASE: [WARN ] chxextensionmodule.cpp:1415 BuildLogicalCameraInfo() Please check if sensor id:6 is probed successfully! 04-23 15:26:17.363 16137 16137 I voxl-camera-server: /local/mnt/workspace/lnxbuild/project/trees_in_use/free_tree_dir/checkout/build-qti-distro-ubuntu-fullstack-perf/tmp-glibc/work/qrb5165_rb5-oe-linux/adsprpc/git-r1/adsprpc/src/fastrpc_apps_user.c:2273: fastrpc_apps_user_deinit done -
@Matthew-Wellner , did you update to sdk 1.4.1? Can you please let me know what camera(s) you have connected (and which camera port) and the contents of your /usr/lib/camera? Does voxl-camera-server -l detect any cameras?
Alex
-
It seems that camera server gets stuck after
thread is locked to cores: 4 5 6 7Can you please run
voxl-camera-server -d 0to enable full debugging prints and see if anything prints after that ?Thank you
Alex
-
@Alex-Kushleyev I updated to 1.4.1 and I have an IMX412 attached to port J7 upper.
Contents of /usr/lib/camera:
ls -la /usr/lib/camera/ total 5840 drwxr-xr-x 3 root root 4096 Apr 23 15:35 . drwxr-xr-x 69 root root 24576 Apr 22 17:15 .. -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.eeprom.cmk_imx577.so -rwxr-xr-x 1 root root 9904 Nov 11 22:27 com.qti.sensor.ar0144.so -rwxr-xr-x 1 root root 5808 Nov 11 22:27 com.qti.sensor.boson.so -rwxr-xr-x 1 root root 5816 Nov 11 22:27 com.qti.sensor.cmk_imx577.so -rwxr-xr-x 1 root root 5816 Nov 11 22:27 com.qti.sensor.cmk_imx577_flip.so -rwxr-xr-x 1 root root 9904 Nov 11 22:27 com.qti.sensor.imx214.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.imx214_flip.so -rwxr-xr-x 1 root root 9904 Nov 11 22:27 com.qti.sensor.imx335.so -rwxr-xr-x 1 root root 5808 Nov 11 22:27 com.qti.sensor.imx377.so -rwxr-xr-x 1 root root 8360 Apr 22 20:16 com.qti.sensor.imx412_fpv.so -rwxr-xr-x 1 root root 9904 Nov 11 22:27 com.qti.sensor.imx664.so -rwxr-xr-x 1 root root 9904 Nov 11 22:27 com.qti.sensor.imx678.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.imx678_flip.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.imx678_mod.so -rwxr-xr-x 1 root root 5808 Nov 11 22:27 com.qti.sensor.irs1645.so -rwxr-xr-x 1 root root 5808 Nov 11 22:27 com.qti.sensor.irs2975c.so -rwxr-xr-x 1 root root 9904 Nov 11 22:27 com.qti.sensor.ov64b40.so -rwxr-xr-x 1 root root 9904 Nov 11 22:27 com.qti.sensor.ov7251.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.ov7251_front_left.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov7251_front_left_flip.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov7251_front_right.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov7251_front_right_flip.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.ov7251_fsin.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.ov7251_fsout.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.ov7251_rear_left.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov7251_rear_left_flip.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.ov7251_rear_right.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov7251_rear_right_flip.so -rwxr-xr-x 1 root root 9904 Nov 11 22:27 com.qti.sensor.ov9782.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.ov9782_front_left.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov9782_front_left_flip.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov9782_front_right.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov9782_front_right_flip.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.ov9782_rear_left.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov9782_rear_left_flip.so -rwxr-xr-x 1 root root 9912 Nov 11 22:27 com.qti.sensor.ov9782_rear_right.so -rwxr-xr-x 1 root root 9920 Nov 11 22:27 com.qti.sensor.ov9782_rear_right_flip.so -rw-r--r-- 1 root root 149272 Apr 23 15:35 com.qti.sensormodule.imx214_3.bin -rw-r--r-- 1 root root 957344 Nov 11 22:27 com.qti.tuned.cmk_imx577.bin -rw-r--r-- 1 root root 835464 Nov 11 22:27 com.qti.tuned.cmk_ov9282.bin -rw-r--r-- 1 root root 931864 Nov 11 22:27 com.qti.tuned.default.bin -rw-r--r-- 1 root root 957344 Nov 11 22:27 com.qti.tuned.imx412_fpv.bin -rw-r--r-- 1 root root 793816 Nov 11 22:27 com.qti.tuned.ov9782.bin -rw-r--r-- 1 root root 882376 Nov 11 22:27 com.qti.tuned.sony_imx335.bin drwxr-xr-x 2 root root 4096 Nov 11 22:41 componentsvoxl-camera-server -l crashes similarly to when I try to run the server normally (it just exits and logcat has the same output as above)
If I run "voxl-camera-server -d 0" it says that it doesn't recognize any cameras.
fsync_en: 0 fsync_gpio: 109 ================================================================= DEBUG: Attempting to open the hal module DEBUG: SUCCESS: Camera module opened on attempt 0 DEBUG: ----------- Number of cameras: 0 VERBOSE: cci-direct: using voxl_platform_mod config 0 layout ERROR: Found zero cameras connected, need at least one. -
@Alex-Kushleyev I moved the low latency .bin files into /usr/share/modalai/chi-cdk/imx412-fpv/ and the .so file into /usr/lib/camera. Was I not supposed to do that?
-
@Matthew-Wellner , both the .so and sensormodule(s) files need to go to
/usr/lib/camera!/usr/share/modalai/chi-cdkis used to store all the camera drivers that we ship with the SDK, but they are not used from this location. You either need to copy the correct sensormodule files fromchi-cdklocation into/usr/lib/camera/or runvoxl-configure-camerasscript, which will do it based on a standard config.Sorry for the confusion.
Alex
-
@Alex-Kushleyev I fixed the drivers and got back to the issue I was having where the voxl-camera-server would just die after a short time. Here is the output from voxl-camera-server -d 0:
voxl2:/$ voxl-camera-server -d 0 detected system image 1.8.2 using new imx412 defaults ================================================================= configuration for 1 cameras: cam #0 name: hires sensor type: imx412 isEnabled: 1 camId: 0 camId2: -1 fps: 60 en_rotate: 0 en_rotate2: 0 en_preview: 1 pre_width: 4040 pre_height: 3040 en_raw_preview: 1 en_small_video: 1 small_video_width: 1024 small_video_height: 768 en_large_video: 0 large_video_width: 4208 large_video_height: 3120 en_misp: 0 misp_width: -1 misp_height: -1 en_snapshot: 0 snap_width: 4208 snap_height: 3120 exif_focal_length: 0.000000 exif_focal_len_35mm_format:0 exif_fnumber: 0.000000 ae_mode: isp msv_exposure_min_us: 20 msv_exposure_max_us: 33000 gain_min : 54 gain_max : 8000 standby_enabled: 0 decimator: 1 independent_exposure:0 fsync_en: 0 fsync_gpio: 109 ================================================================= DEBUG: Attempting to open the hal module DEBUG: SUCCESS: Camera module opened on attempt 0 DEBUG: ----------- Number of cameras: 1 VERBOSE: cci-direct: using voxl_platform_mod config 0 layout DEBUG: Cam idx: 0, Cam slot: 3, Slave Address: 0x0034, Sensor Id: 0x0577 thread is locked to cores: 4 5 6 7 connected to mavlink pipe Connected to cpu-monitor DEBUG: ------ voxl-camera-server: Starting 1 cameras Starting Camera: hires (id #0) DEBUG: Checking Gain limits for Camera: hires DEBUG: Using gain limits min: 100 max: 8000 DEBUG: cam ID 0 checking for fmt: 37 w: 4040 h: 3040 o: 0 DEBUG: ==> option 0: format= 34 width=4056 height=3040 is_input=0 DEBUG: ==> option 4: format= 34 width=4056 height=3040 is_input=1 DEBUG: ==> option 8: format= 35 width=4056 height=3040 is_input=0 ... DEBUG: ==> option 568: format= 32 width=1996 height= 240 is_input=0 DEBUG: ==> option 572: format= 36 width=1996 height= 240 is_input=0 VERBOSE: Successfully found configuration match for camera 0: 4040x3040 DEBUG: cam ID 0 checking for fmt: 35 w: 1024 h: 768 o: 0 DEBUG: ==> option 0: format= 34 width=4056 height=3040 is_input=0 DEBUG: ==> option 4: format= 34 width=4056 height=3040 is_input=1 ... DEBUG: ==> option 572: format= 36 width=1996 height= 240 is_input=0 VERBOSE: Successfully found configuration match for camera 0: 1024x768 VERBOSE: Adding preview stream for camera: 0 VERBOSE: Adding small video stream for camera: 0 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI VERBOSE: Opened GBM fd gbm_create_device(156): Info: backend name is: msm_drm VERBOSE: Created GBM device DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=62 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=64 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=66 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=68 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=70 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=72 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=74 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=76 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=78 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=80 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=82 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=84 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=86 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=88 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=90 vaddr=0x55941b5000 DEBUG: Converted gralloc flags 0x20900 to GBM flags 0x1400000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CAMERA_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_HW_COMPOSER_QTI DEBUG: Allocated BO with width=4040 height=3040 stride=5056 aligned_w=5056 aligned_h=3040 size=15372288 flags=0x20900 format=GBM_FORMAT_RAW10 fd=92 vaddr=0x55941b5000 DEBUG: Successfully set up pipeline for stream: PREVIEW DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=94 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=96 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=98 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=100 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=102 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=104 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=106 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=108 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=110 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=112 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=114 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=116 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=118 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=120 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=122 vaddr=0x7fe2a813a0 DEBUG: Found video encoder usage, removing camera read/write usage DEBUG: Converted gralloc flags 0x30022 to GBM flags 0x860000 VERBOSE: Dumping GBM flags DEBUG: Found flag GBM_BO_USAGE_CPU_READ_QTI DEBUG: Found flag GBM_BO_USAGE_CPU_WRITE_QTI DEBUG: Found flag GBM_BO_USAGE_VIDEO_ENCODER_QTI DEBUG: Allocated BO with width=1024 height=768 stride=1024 aligned_w=1024 aligned_h=1024 size=1572864 flags=0x30022 format=GBM_FORMAT_YCbCr_420_888 fd=124 vaddr=0x7fe2a813a0 DEBUG: Available color formats for OMX: DEBUG: Unknown (0x7fa30c06) DEBUG: Unknown (0x7fa30c06) DEBUG: OMX_QCOM_COLOR_FormatYUV420PackedSemiPlanar32m (0x7fa30c04) DEBUG: OMX_QCOM_COLOR_FormatYVU420SemiPlanar (0x7fa30c00) DEBUG: Unknown (0x7fa30c09) DEBUG: Unknown (0x7fa30c0a) DEBUG: Unknown (0x7fa30c08) DEBUG: Unknown (0x7fa30c07) DEBUG: OMX_COLOR_FormatAndroidOpaque (0x7f000789) DEBUG: OMX_COLOR_FormatYUV420SemiPlanar (0x15) WARNING: OMX SetTargetBitrate: H265 CBR requires bps >= 3.0Mbit (2000000 bps provided). Using FPS hack. scale = 1.500000 DEBUG: Buffer Count Expected: 16 DEBUG: Buffer Count Actual: 16 DEBUG: Port Def 0: Count Min: 16 Count Actual: 16 Size: 0x10 Buffers Contiguous: Yes Buffer Alignment: 0 DEBUG: Buffer Count Expected: 16 DEBUG: Buffer Count Actual: 16 DEBUG: Port Def 1: Count Min: 12 Count Actual: 16 Size: 0xb40000 Buffers Contiguous: No Buffer Alignment: 0 DEBUG: OMX_EventCmdComplete DEBUG: OMX_EventCmdComplete DEBUG: OMX_EventCmdComplete DEBUG: Encoder moved to Idle State DEBUG: OMX_EventCmdComplete DEBUG: Encoder moved to Executing State DEBUG: Successfully set up pipeline for stream: STREAM_SMALL_VID VERBOSE: Entered thread: cam0-request(tid: 4083) VERBOSE: Entered thread: cam0-result(tid: 4084) DEBUG: Started Camera: hires ------ voxl-camera-server: Started 1 of 1 cameras ------ voxl-camera-server: Camera server is now running VERBOSE: added request for small video stream VERBOSE: added request for preview stream VERBOSE: Sending request for frame 0 for camera hires for 2 streams VERBOSE: Received result from HAl3 for frame number 0 VERBOSE: Received 0 buffers from camera hires, partial result:1 VERBOSE: finished sending request for frame 0 for camera hires VERBOSE: returning from SendOneCaptureRequest for frame 1 for camera hires VERBOSE: added request for small video stream VERBOSE: added request for preview stream VERBOSE: Sending request for frame 1 for camera hires for 2 streams VERBOSE: finished sending request for frame 1 for camera hires VERBOSE: returning from SendOneCaptureRequest for frame 2 for camera hires VERBOSE: added request for small video stream VERBOSE: added request for preview stream VERBOSE: Sending request for frame 2 for camera hires for 2 streams VERBOSE: finished sending request for frame 2 for camera hires VERBOSE: returning from SendOneCaptureRequest for frame 3 for camera hires VERBOSE: added request for small video stream VERBOSE: added request for preview stream VERBOSE: Sending request for frame 3 for camera hires for 2 streams VERBOSE: finished sending request for frame 3 for camera hires VERBOSE: returning from SendOneCaptureRequest for frame 4 for camera hires VERBOSE: added request for small video stream VERBOSE: added request for preview stream VERBOSE: Sending request for frame 4 for camera hires for 2 streams VERBOSE: finished sending request for frame 4 for camera hires VERBOSE: returning from SendOneCaptureRequest for frame 5 for camera hires VERBOSE: added request for small video stream VERBOSE: added request for preview stream VERBOSE: Sending request for frame 5 for camera hires for 2 streams VERBOSE: finished sending request for frame 5 for camera hires VERBOSE: returning from SendOneCaptureRequest for frame 6 for camera hires VERBOSE: added request for small video stream VERBOSE: added request for preview stream VERBOSE: Sending request for frame 6 for camera hires for 2 streams VERBOSE: Received result from HAl3 for frame number 1 VERBOSE: Received 0 buffers from camera hires, partial result:1 VERBOSE: Received result from HAl3 for frame number 2 VERBOSE: Received 0 buffers from camera hires, partial result:1 DEBUG: Value of standby_active is: 0 DEBUG: Value of standby_active is: 0 DEBUG: Value of standby_active is: 0 DEBUG: Value of standby_active is: 0 DEBUG: Value of standby_active is: 0 Aborted voxl2:/$ -
@Matthew-Wellner , thanks, that is looking better.
Now, two questions..
- which version of the IMX412 drivers are you using now?
- does the error still happen if you change the FPS to 30? what about 50?
Alex
-
- I downloaded and installed the low latency drivers found on the low latency tutorial page -> https://docs.modalai.com/camera-video/low-latency-video-streaming/
- Yes it still occurs for... 30, 50, 60, & 90
Thanks again for the help!
-
Is any configuration at all working? I wonder if this is a hardware issue.
I will set up the exact use case and test. By the way i have recently updated the instructions you are referencing with updated imx412 drivers, so please double check the date on the driver zip file. Meanwhile, can you also post dmesg output after the camera server aborts? This can help spot a hardware issue.
Alex
-
@Alex-Kushleyev - Thanks again!
Here is the output from /var/log/syslog when I run "voxl-camera-server -l":
Apr 24 13:55:58 m0054 kernel: [68157.917569] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.55 Apr 24 13:55:58 m0054 kernel: [68157.917657] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.79 Apr 24 13:55:58 m0054 kernel: [68157.946997] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base: pK-error, M1_Q1 NACK ERROR: 0x40000000 Apr 24 13:55:58 m0054 kernel: [68157.947039] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x20: Apr 24 13:55:58 m0054 kernel: [68157.947042] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 13:55:58 m0054 kernel: [68157.947044] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 13:55:58 m0054 kernel: [68157.947118] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.79 Apr 24 13:55:58 m0054 kernel: [68157.950956] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.55 Apr 24 13:55:58 m0054 kernel: [68157.950973] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.59 Apr 24 13:55:58 m0054 kernel: [68157.976036] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.58 Apr 24 13:55:58 m0054 kernel: [68157.976121] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.60 Apr 24 13:55:58 m0054 kernel: [68157.976135] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.55 Apr 24 13:55:58 m0054 kernel: [68157.976219] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.79 Apr 24 13:55:58 m0054 kernel: [68158.005077] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base: pK-error, M0_Q1 NACK ERROR: 0x10000000 Apr 24 13:55:58 m0054 kernel: [68158.005148] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 13:55:58 m0054 kernel: [68158.005150] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 13:55:58 m0054 kernel: [68158.005151] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 13:55:58 m0054 kernel: [68158.005152] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 13:55:58 m0054 kernel: [68158.006941] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.55 Apr 24 13:55:58 m0054 kernel: [68158.006950] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.60 Apr 24 13:55:58 m0054 kernel: [68158.006982] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.58 Apr 24 13:55:58 m0054 kernel: [68158.032566] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.58 Apr 24 13:55:58 m0054 kernel: [68158.032721] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.60 Apr 24 13:55:58 m0054 kernel: [68158.032773] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.55 Apr 24 13:55:58 m0054 kernel: [68158.032908] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.79 Apr 24 13:55:58 m0054 kernel: [68158.047391] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base: pK-error, M1_Q1 NACK ERROR: 0x40000000 Apr 24 13:55:58 m0054 kernel: [68158.047453] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 13:55:58 m0054 kernel: [68158.047460] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 13:55:58 m0054 kernel: [68158.047463] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 13:55:58 m0054 kernel: [68158.047466] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 13:55:58 m0054 kernel: [68158.071859] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.59 Apr 24 13:55:58 m0054 kernel: [68158.071964] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.60 Apr 24 13:55:58 m0054 kernel: [68158.072012] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.55 Apr 24 13:55:58 m0054 kernel: [68158.072156] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.79 Apr 24 13:55:58 m0054 kernel: [68158.086849] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base: pK-error, M0_Q1 NACK ERROR: 0x10000000 Apr 24 13:55:58 m0054 kernel: [68158.087102] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.79 Apr 24 13:55:58 m0054 kernel: [68158.111682] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.59 Apr 24 13:55:58 m0054 kernel: [68158.111767] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.60 Apr 24 13:55:58 m0054 kernel: [68158.111807] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.55 Apr 24 13:55:58 m0054 kernel: [68158.111928] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.79 Apr 24 13:55:58 m0054 kernel: [68158.126905] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 918 Probe success,slot:3,slave_addr:0x34,sensor_id:0x577 Apr 24 13:55:58 m0054 kernel: [68158.126957] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.79 Apr 24 13:55:58 m0054 kernel: [68158.129028] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.55 Apr 24 13:55:58 m0054 kernel: [68158.129054] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.60 Apr 24 13:55:58 m0054 kernel: [68158.129093] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.59 Apr 24 13:55:58 m0054 kernel: [68158.142057] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.59 Apr 24 13:55:58 m0054 kernel: [68158.142146] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.60 Apr 24 13:55:58 m0054 kernel: [68158.142191] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.55 Apr 24 13:55:58 m0054 kernel: [68158.142399] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.79 Apr 24 13:55:59 m0054 kernel: [68158.157433] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base: pK-error, M1_Q1 NACK ERROR: 0x40000000 Apr 24 13:55:59 m0054 kernel: [68158.157491] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 13:55:59 m0054 kernel: [68158.157496] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 13:55:59 m0054 kernel: [68158.157498] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 13:55:59 m0054 kernel: [68158.157502] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 13:55:59 m0054 kernel: [68158.157592] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.79 Apr 24 13:55:59 m0054 kernel: [68158.159023] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.55 Apr 24 13:55:59 m0054 kernel: [68158.159056] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.60 Apr 24 13:55:59 m0054 kernel: [68158.183788] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.59 Apr 24 13:55:59 m0054 kernel: [68158.183871] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.60 Apr 24 13:55:59 m0054 kernel: [68158.183911] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.55 Apr 24 13:55:59 m0054 kernel: [68158.184037] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.79 Apr 24 13:55:59 m0054 kernel: [68158.198670] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base: pK-error, M1_Q1 NACK ERROR: 0x40000000 Apr 24 13:55:59 m0054 kernel: [68158.198737] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 13:55:59 m0054 kernel: [68158.198740] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 13:55:59 m0054 kernel: [68158.198742] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 13:55:59 m0054 kernel: [68158.198745] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 13:55:59 m0054 kernel: [68158.198801] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.79 Apr 24 13:55:59 m0054 kernel: [68158.239903] CAM_WARN: CAM-CRM: cam_req_mgr_close: 160 release invoked associated userspace process has diedI'll wait for your feedback, but I can try reinstalling the drivers from your tutorial and if that doesn't work, I can reflash the SDK as well.
-
@Matthew-Wellner , so this looks fine, what about dmesg when you don't use -l (just voxl-camera-server), so that we see the dmesg prints when camera server aborts.
-
@Alex-Kushleyev Here is the output from dmesg when I run the voxl-camera-server:
Apr 24 19:31:55 m0054 tailscaled[1610]: netcheck: DetectCaptivePortal(found=false) Apr 24 19:32:14 m0054 kernel: [88334.080488] qcom_rpmh DRV:apps_rsc TCS Busy, retrying RPMH message send: addr=0x40d00 Apr 24 19:32:24 m0054 kernel: [88344.643537] CAM_ERR: CAM-MEM: cam_mem_mgr_create_debug_fs: 126 failed to create dentry Apr 24 19:32:25 m0054 kernel: [88344.720291] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.59 Apr 24 19:32:25 m0054 kernel: [88344.745479] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x20: Apr 24 19:32:25 m0054 kernel: [88344.745482] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 19:32:25 m0054 kernel: [88344.745488] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 19:32:25 m0054 kernel: [88344.745494] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x214: Apr 24 19:32:25 m0054 kernel: [88344.745595] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.748968] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.774119] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.58 Apr 24 19:32:25 m0054 kernel: [88344.774208] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.774231] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.774316] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Linked as a consumer to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.798756] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base: pK-error, M0_Q1 NACK ERROR: 0x10000000 Apr 24 19:32:25 m0054 kernel: [88344.798828] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 19:32:25 m0054 kernel: [88344.798832] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 19:32:25 m0054 kernel: [88344.798838] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 19:32:25 m0054 kernel: [88344.798843] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 19:32:25 m0054 kernel: [88344.798949] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.801095] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.801128] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.801171] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor0: Dropping the link to regulator.58 Apr 24 19:32:25 m0054 kernel: [88344.825623] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.58 Apr 24 19:32:25 m0054 kernel: [88344.825737] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.825780] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.825906] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Linked as a consumer to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.840658] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base: pK-error, M1_Q1 NACK ERROR: 0x40000000 Apr 24 19:32:25 m0054 kernel: [88344.840730] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 19:32:25 m0054 kernel: [88344.840735] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 19:32:25 m0054 kernel: [88344.840737] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 19:32:25 m0054 kernel: [88344.840740] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 19:32:25 m0054 kernel: [88344.840800] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.842876] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.842906] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.842943] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor1: Dropping the link to regulator.58 Apr 24 19:32:25 m0054 kernel: [88344.865869] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.59 Apr 24 19:32:25 m0054 kernel: [88344.866000] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.866043] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.866171] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Linked as a consumer to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.880067] CAM_ERR: CAM-CCI: cam_cci_irq: 238 Base: pK-error, M0_Q1 NACK ERROR: 0x10000000 Apr 24 19:32:25 m0054 kernel: [88344.880100] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 19:32:25 m0054 kernel: [88344.880104] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 19:32:25 m0054 kernel: [88344.880106] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 19:32:25 m0054 kernel: [88344.880109] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 19:32:25 m0054 kernel: [88344.880163] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.881467] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.881498] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.881538] qcom,camera ac50000.qcom,cci:qcom,cam-sensor2: Dropping the link to regulator.59 Apr 24 19:32:25 m0054 kernel: [88344.905689] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.59 Apr 24 19:32:25 m0054 kernel: [88344.905829] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.905874] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.906009] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.920664] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 918 Probe success,slot:3,slave_addr:0x34,sensor_id:0x577 Apr 24 19:32:25 m0054 kernel: [88344.920718] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.922792] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.922822] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.922861] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.59 Apr 24 19:32:25 m0054 kernel: [88344.935529] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.59 Apr 24 19:32:25 m0054 kernel: [88344.935651] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.935696] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.936089] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Linked as a consumer to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.950853] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base: pK-error, M1_Q1 NACK ERROR: 0x40000000 Apr 24 19:32:25 m0054 kernel: [88344.950884] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 19:32:25 m0054 kernel: [88344.950890] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 19:32:25 m0054 kernel: [88344.950893] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 19:32:25 m0054 kernel: [88344.950897] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 19:32:25 m0054 kernel: [88344.950969] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.953024] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.953077] qcom,camera ac4f000.qcom,cci:qcom,cam-sensor4: Dropping the link to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.977985] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.59 Apr 24 19:32:25 m0054 kernel: [88344.978070] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.978115] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.978240] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Linked as a consumer to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.992921] CAM_ERR: CAM-CCI: cam_cci_irq: 264 Base: pK-error, M1_Q1 NACK ERROR: 0x40000000 Apr 24 19:32:25 m0054 kernel: [88344.993008] CAM_ERR: CAM-CCI: cam_cci_read: 1329 ERROR with Slave 0x34: Apr 24 19:32:25 m0054 kernel: [88344.993045] CAM_ERR: CAM-CCI: cam_cci_read_bytes: 1613 failed to read rc:-22 Apr 24 19:32:25 m0054 kernel: [88344.993048] CAM_ERR: CAM-SENSOR: cam_cci_i2c_read: 35 rc = -22 Apr 24 19:32:25 m0054 kernel: [88344.993050] CAM_WARN: CAM-SENSOR: cam_sensor_match_id: 707 read id: 0x0 expected id 0x577: Apr 24 19:32:25 m0054 kernel: [88344.993117] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.79 Apr 24 19:32:25 m0054 kernel: [88344.995197] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.55 Apr 24 19:32:25 m0054 kernel: [88344.995226] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.60 Apr 24 19:32:25 m0054 kernel: [88344.995271] qcom,camera ac50000.qcom,cci:qcom,cam-sensor5: Dropping the link to regulator.59 Apr 24 19:32:25 m0054 kernel: [88345.040157] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.59 Apr 24 19:32:25 m0054 kernel: [88345.040247] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.60 Apr 24 19:32:25 m0054 kernel: [88345.040267] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.55 Apr 24 19:32:25 m0054 kernel: [88345.040362] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Linked as a consumer to regulator.79 Apr 24 19:32:25 m0054 kernel: [88345.054061] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 997 CAM_ACQUIRE_DEV Success, sensor_id:0x577,sensor_slave_addr:0x34 Apr 24 19:32:25 m0054 kernel: [88345.055287] CAM_INFO: CAM-HFI: cam_hfi_resume: 679 Resume IO1 : [0x10c00000 0xcf300000] IO2 [0xe0200000 0x1ed00000] Apr 24 19:32:25 m0054 kernel: [88345.085767] msm_vidc: high: 00000001: ....e: Opening video instance: ffffffd908ed6000, 0 Apr 24 19:32:25 m0054 kernel: [88345.361053] CAM_ERR: CAM-ISP: cam_ife_csid_cid_reserve: 1040 CSID:6 IPP resource not available Apr 24 19:32:25 m0054 kernel: [88345.361057] CAM_ERR: CAM-ISP: cam_ife_csid_cid_reserve: 1040 CSID:5 IPP resource not available Apr 24 19:32:25 m0054 kernel: [88345.361059] CAM_ERR: CAM-ISP: cam_ife_csid_cid_reserve: 1040 CSID:4 IPP resource not available Apr 24 19:32:25 m0054 kernel: [88345.361061] CAM_ERR: CAM-ISP: cam_ife_csid_cid_reserve: 1040 CSID:3 IPP resource not available Apr 24 19:32:25 m0054 kernel: [88345.361062] CAM_ERR: CAM-ISP: cam_ife_csid_cid_reserve: 1040 CSID:2 IPP resource not available Apr 24 19:32:25 m0054 kernel: [88345.361091] CAM_ERR: CAM-ISP: cam_ife_hw_mgr_print_acquire_info: 710 Successfully acquire single IFE[1 -1] with [9 pix] [0 pd] [1 rdi] ports for ctx:9 Apr 24 19:32:25 m0054 kernel: [88345.365802] CAM_INFO: CAM-CSIPHY: cam_csiphy_core_cfg: 1137 START_DEV: CSIPHY_IDX: 3, Device_slot: 0, Datarate: 2500000000, Settletime: 2200000000 Apr 24 19:32:25 m0054 kernel: [88345.374728] CAM_INFO: CAM-ISP: cam_vfe_bus_ver3_init_hw: 3659 Overriding clock gating at bus input Apr 24 19:32:25 m0054 kernel: [88345.374732] CAM_INFO: CAM-ISP: cam_vfe_top_ver3_init_hw: 246 Disable clock gating at IFE top Apr 24 19:32:25 m0054 kernel: [88345.374879] CAM_ERR: CAM-ISP: cam_ife_mgr_start_hw: 4510 ->Config HW, 0000000013f5b900 Apr 24 19:32:25 m0054 kernel: [88345.376000] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 1089 CAM_START_DEV Success, sensor_id:0x577,sensor_slave_addr:0x34 Apr 24 19:32:26 m0054 voxl-cpu-monitor[1757]: client "voxl-camera-server51691034" with id 0 has disconnected from channel 0 Apr 24 19:32:26 m0054 voxl-cpu-monitor[1757]: client "voxl-camera-server88398822" connected to channel 0 with client id 0 Apr 24 19:32:30 m0054 kernel: [88350.083476] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 0 fd 130 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083481] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 1 fd 132 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083482] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 2 fd 134 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083484] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 3 fd 136 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083485] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 4 fd 138 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083486] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 5 fd 140 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083487] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 6 fd 142 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083488] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 7 fd 144 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083489] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 8 fd 146 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083490] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 9 fd 148 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083491] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 10 fd 150 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083492] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 11 fd 152 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083493] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 12 fd 154 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083494] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 13 fd 156 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083495] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 14 fd 158 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083496] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 15 fd 160 off 0 size 884736 filled 0 Apr 24 19:32:30 m0054 kernel: [88350.083500] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 0 fd 130 off 0 daddr dfb00000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083511] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 1 fd 132 off 0 daddr dfa00000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083515] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 2 fd 134 off 0 daddr df900000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083519] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 3 fd 136 off 0 daddr df800000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083522] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 4 fd 138 off 0 daddr df700000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083525] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 5 fd 140 off 0 daddr df600000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083528] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 6 fd 142 off 0 daddr df500000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083532] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 7 fd 144 off 0 daddr df400000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083534] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 8 fd 146 off 0 daddr df300000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083537] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 9 fd 148 off 0 daddr df200000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083540] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 10 fd 150 off 0 daddr df100000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083543] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 11 fd 152 off 0 daddr df000000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083546] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 12 fd 154 off 0 daddr def00000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083549] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 13 fd 156 off 0 daddr dee00000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083552] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 14 fd 158 off 0 daddr ded00000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 kernel: [88350.083554] msm_vidc: err : 00000001: h265e: undequeud buf: CAPTURE: idx 15 fd 160 off 0 daddr dec00000 size 884736 filled 0 flags 0x0 ts 0 refcnt 2 mflags 0x1 Apr 24 19:32:30 m0054 voxl-portal[1760]: ERROR in pipe_client_open opening request pipe: No such device or address Apr 24 19:32:30 m0054 voxl-portal[1760]: Most likely the server stopped without cleaning up Apr 24 19:32:30 m0054 voxl-portal[1760]: Client is cleaning up pipes for the server Apr 24 19:32:30 m0054 voxl-portal[1760]: ERROR in pipe_client_open opening request pipe: No such device or address Apr 24 19:32:30 m0054 voxl-portal[1760]: Most likely the server stopped without cleaning up Apr 24 19:32:30 m0054 voxl-portal[1760]: Client is cleaning up pipes for the server Apr 24 19:32:30 m0054 kernel: [88350.096208] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.79 Apr 24 19:32:30 m0054 kernel: [88350.098251] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.55 Apr 24 19:32:30 m0054 kernel: [88350.098263] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.60 Apr 24 19:32:30 m0054 kernel: [88350.098279] qcom,camera ac50000.qcom,cci:qcom,cam-sensor3: Dropping the link to regulator.59 Apr 24 19:32:30 m0054 kernel: [88350.106121] CAM_ERR: CAM-SYNC: cam_sync_signal: 203 Error: accessing an uninitialized sync obj = 1 Apr 24 19:32:30 m0054 kernel: [88350.106122] CAM_ERR: CAM-SYNC: cam_sync_signal: 203 Error: accessing an uninitialized sync obj = 2 Apr 24 19:32:30 m0054 kernel: [88350.106123] CAM_ERR: CAM-SYNC: cam_sync_signal: 203 Error: accessing an uninitialized sync obj = 2 Apr 24 19:32:30 m0054 kernel: [88350.106124] CAM_ERR: CAM-SYNC: cam_sync_signal: 203 Error: accessing an uninitialized sync obj = 2 Apr 24 19:32:30 m0054 kernel: [88350.106125] CAM_ERR: CAM-SYNC: cam_sync_signal: 203 Error: accessing an uninitialized sync obj = 3 Apr 24 19:32:30 m0054 kernel: [88350.106127] CAM_ERR: CAM-ISP: __cam_isp_ctx_release_dev_in_top_state: 3789 releasing hw Apr 24 19:32:30 m0054 kernel: [88350.106156] CAM_WARN: CAM-CRM: cam_req_mgr_close: 160 release invoked associated userspace process has died Apr 24 19:32:30 m0054 kernel: [88350.106286] CAM-REQ-MGR_UTIL cam_req_mgr_util_free_hdls:99 CAM_WARN: CAM-CRM: cam_req_mgr_util_free_hdls: 99 Dev handle = 5a0103 session_handle = 7e0200 Apr 24 19:32:30 m0054 kernel: [88350.119201] ion_buffer_destroy: 6 callbacks suppressed Apr 24 19:32:30 m0054 kernel: [88350.119252] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133256] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133270] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133287] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133294] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133358] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133383] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133392] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133401] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:30 m0054 kernel: [88350.133426] ION client likely missing a call to dma_buf_kunmap or dma_buf_vunmap Apr 24 19:32:31 m0054 kernel: [88351.602923] msm_vidc: err : ffffffff: .....: DBLP Set: status 0 -
@Matthew-Wellner , it looks like VOXL2 never gets any frames and after 5 seconds the camera pipeline gives up.
Here is relevant part of your output:
Apr 24 19:32:25 m0054 kernel: [88345.361091] CAM_ERR: CAM-ISP: cam_ife_hw_mgr_print_acquire_info: 710 Successfully acquire single IFE[1 -1] with [9 pix] [0 pd] [1 rdi] ports for ctx:9 Apr 24 19:32:25 m0054 kernel: [88345.365802] CAM_INFO: CAM-CSIPHY: cam_csiphy_core_cfg: 1137 START_DEV: CSIPHY_IDX: 3, Device_slot: 0, Datarate: 2500000000, Settletime: 2200000000 Apr 24 19:32:25 m0054 kernel: [88345.374728] CAM_INFO: CAM-ISP: cam_vfe_bus_ver3_init_hw: 3659 Overriding clock gating at bus input Apr 24 19:32:25 m0054 kernel: [88345.374732] CAM_INFO: CAM-ISP: cam_vfe_top_ver3_init_hw: 246 Disable clock gating at IFE top Apr 24 19:32:25 m0054 kernel: [88345.374879] CAM_ERR: CAM-ISP: cam_ife_mgr_start_hw: 4510 ->Config HW, 0000000013f5b900 Apr 24 19:32:25 m0054 kernel: [88345.376000] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 1089 CAM_START_DEV Success, sensor_id:0x577,sensor_slave_addr:0x34 Apr 24 19:32:26 m0054 voxl-cpu-monitor[1757]: client "voxl-camera-server51691034" with id 0 has disconnected from channel 0 Apr 24 19:32:26 m0054 voxl-cpu-monitor[1757]: client "voxl-camera-server88398822" connected to channel 0 with client id 0 Apr 24 19:32:30 m0054 kernel: [88350.083476] msm_vidc: err : 00000001: h265e: undequeud vb2: CAPTURE: idx 0 fd 130 off 0 size 884736 filled 0Note at 25 second mark, the camera is commanded to stream (then a few messages related to camera server pipes), but then at 30 second mark, the camera pipeline collapse starts (timeout).
Here is my ouputput:
[ 2075.623593] CAM_ERR: CAM-ISP: cam_ife_hw_mgr_print_acquire_info: 710 Successfully acquire single IFE[1 -1] with [9 pix] [0 pd] [1 rdi] ports for ctx:0 [ 2075.632136] CAM_INFO: CAM-CSIPHY: cam_csiphy_core_cfg: 1137 START_DEV: CSIPHY_IDX: 1, Device_slot: 0, Datarate: 2500000000, Settletime: 2200000000 [ 2075.642983] CAM_INFO: CAM-ISP: cam_vfe_bus_ver3_init_hw: 3659 Overriding clock gating at bus input [ 2075.642990] CAM_INFO: CAM-ISP: cam_vfe_top_ver3_init_hw: 246 Disable clock gating at IFE top [ 2075.643255] CAM_ERR: CAM-ISP: cam_ife_mgr_start_hw: 4510 ->Config HW, 00000000e4fe1a70 [ 2075.647168] CAM_INFO: CAM-SENSOR: cam_sensor_driver_cmd: 1089 CAM_START_DEV Success, sensor_id:0x577,sensor_slave_addr:0x34 [ 2075.655208] CAM_INFO: CAM-ISP: __cam_isp_ctx_sof_in_epoch: 1660 First SOF in EPCR ctx:2 frame_id:1 next substate EPOCHNote that there is a message that the
First SOF(Start Of Frame) has been received, and streaming works fine.Can you please provide more information about your hardware:
- Specific camera module used (such as M0107, M0161)
- how are you connecting the camera to VOXL2 (all components between VOXL2 and Camera)
- it seems the camera is connected in slot 3 (VOXL2 J7U) - please confirm
- it seems you are using kernel config 0 (no M0173 camera front end) - please confirm.
It is possible that if you are using an extension flex (I am guessing M0107 camera with M0036 15cm extension flex), some flexes may have high speed issues and the latest IMX412 drivers are running at the maximum MIPI rate (in this case 2.2Gbps), which may be pushing past the performance of the flex.
Both versions of the IMX412 drivers that were posted on the Low Latency Streaming page were using 2.1Gbps speeds (and 2.2Gbps in one mode). However, the default drivers shipped with the SDK use 1.5Gbps (ones found in
/usr/share/modalai/chi-cdk/imx412).If you want to try the slower drivers, you can make a small change in your config:
- remove the existing sensormodules from
/usr/lib/camera/ - copy
com.qti.sensormodule.imx412_3.binfrom/usr/share/modalai/chi-cdk/imx412to/usr/lib/camera - modify
/etc/modalai/voxl-camera-server.confas follows:- set
en_previewto false
- set
- this should just enable one small encoded stream and the camera pipeline will choose some camera source resolution to satisfy 60fps and the resolution of your encoded stream.
I just tried this on my set up and was able to get small encoded stream at 60fps with pretty low latency:
| Pipe Name | bytes | wide | hgt |exp(ms)| gain | frame id |latency(ms)| fps | mbps | format | hires_down_small_encoded | 8976 | 1024 | 768 | 5.26 | 800 | 1000 | 23.2 | 60.0 | 4.2 | H264 (P)Lets try to get back to a configuration that works
