unable to run Mavros
-
Hello,
I've been trying to run mavros from inside a docker container, but it does not seem to be communicating with QGC. I keep getting this error message. Can anybody please tell me what I am doing wrong? Thank you.
-
@Kiazoa-Joao replace localhost_udp_port_number witih 14551 and then restart voxl-vision-hub service via
systemctl restart voxl-vision-hub- I am not super familiar with ROS1 and the availability of master IPs and ports, but I believe your ROS_MASTER_IP is correct and your ROS_IP should also be localhost as I am assuming that 192 address is the address of your parent computer. -
@Kiazoa-Joao replace localhost_udp_port_number witih 14551 and then restart voxl-vision-hub service via
systemctl restart voxl-vision-hub- I am not super familiar with ROS1 and the availability of master IPs and ports, but I believe your ROS_MASTER_IP is correct and your ROS_IP should also be localhost as I am assuming that 192 address is the address of your parent computer.@Zachary-Lowell-0 thank you. I'll try that and let you know if it works.
-
@Kiazoa-Joao replace localhost_udp_port_number witih 14551 and then restart voxl-vision-hub service via
systemctl restart voxl-vision-hub- I am not super familiar with ROS1 and the availability of master IPs and ports, but I believe your ROS_MASTER_IP is correct and your ROS_IP should also be localhost as I am assuming that 192 address is the address of your parent computer.@Zachary-Lowell-0 thanks for the help. it works now, but it says "no offboard signal". do you have any idea why?
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login