Loss of wlan0 and potentially wwan0
-
An update after some additional testing:
I turned on one of the drones without the SIM this AM to find the WIFI adapter was coming online and working, just like the pre-SIM behavior. I tried taking the SIM out of the other drone, but that WIFI adapter still will not turn on. I poweroff -f the drone with working WIFI, put the sim in, and reboot. the WIFI adapter no longer turns on, and wlan0/wwan0 are both non-existent with the same behavior I discussed last week.
further testing, I ran configure-modem on the SIMless drone, which had no impact on the wifi. It seems that putting the SIM card in is what is causing this behavior
-
@groupo Can't say I've seen anything like that before. Can you confirm that the M0090 add-on board is fully seated onto the VOXL 2 with both connectors fully inserted
-
@tom This may be my issue, I still had the standoffs unscrewed so I could take the SIM card out easier. Which two connectors are you referring to? Will rescrew the standoffs in the meantime
-
@tom This may be my issue, I still had the standoffs unscrewed so I could take the SIM card out easier. Which two connectors are you referring to? Will rescrew the standoffs in the meantime
-
I tightened the standoffs back down and the wifi adapter came back on! Also, wwan0 is up for the modem now too. thanks @tom
-
@tom I have a lot of modem-related trouble shooting I would like to do before coming here for actual help, but while I am going thru that, I'd like to broach our use case and see if you have any initial reservations about it. We are running a private LTE network. I know the APN and am calling voxl-config-modem accordingly, but am running into some qmi errors. While I am digging thru some of voxl-modem and voxl-modem-start to see if I can get a handle of what is going on, do you know if this use case is supported?
-
@tom I have a lot of modem-related trouble shooting I would like to do before coming here for actual help, but while I am going thru that, I'd like to broach our use case and see if you have any initial reservations about it. We are running a private LTE network. I know the APN and am calling voxl-config-modem accordingly, but am running into some qmi errors. While I am digging thru some of voxl-modem and voxl-modem-start to see if I can get a handle of what is going on, do you know if this use case is supported?
-
@tom I have a lot of modem-related trouble shooting I would like to do before coming here for actual help, but while I am going thru that, I'd like to broach our use case and see if you have any initial reservations about it. We are running a private LTE network. I know the APN and am calling voxl-config-modem accordingly, but am running into some qmi errors. While I am digging thru some of voxl-modem and voxl-modem-start to see if I can get a handle of what is going on, do you know if this use case is supported?
-
@tom we are using the sierra, I noted in another post that it is the 9291 and I see only an option for the 9191, but one of the other devs (Alex?) had said that the 9191 option would be fine
-
@tom we are using the sierra, I noted in another post that it is the 9291 and I see only an option for the 9191, but one of the other devs (Alex?) had said that the 9191 option would be fine
@groupo Yeah that option in voxl-configure-modem is correct, I should update it in the future to make it more clear.
This is what gets run on boot with that option: https://gitlab.com/voxl-public/voxl-sdk/utilities/voxl-modem/-/blob/master/scripts/voxl-modem-start?ref_type=heads#L122
For that modem, voxl-modem just acts as a wrapper for
qmicli: https://gitlab.com/voxl-public/voxl-sdk/utilities/voxl-modem/-/blob/master/scripts/voxl-modem-start?ref_type=heads#L147Feel free to modify the script as needed to fit your application
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login