Can't arm the Sentinel Drone.
-
Hi:
I am trying to fly the Sentinel drone for the first time. In the, QGC, it is showing 'Not ready' and in the expansion of the error, I can see two things, 'Horizontal gps error is too high' and 'Obstacle avoidance is not ready'. I tried disabling gps and it shows 'Ready to fly' but the drone is not arming. Another thing I noticed, I don't have a 'voxl-px4.conf' file under /etc/modalai folder. Any direction would be greatly appreciated. -
Hi:
I am trying to fly the Sentinel drone for the first time. In the, QGC, it is showing 'Not ready' and in the expansion of the error, I can see two things, 'Horizontal gps error is too high' and 'Obstacle avoidance is not ready'. I tried disabling gps and it shows 'Ready to fly' but the drone is not arming. Another thing I noticed, I don't have a 'voxl-px4.conf' file under /etc/modalai folder. Any direction would be greatly appreciated.@Emon_dey Can you post the output of
ls /etc/modalai? Are you trying to arm in manual mode? There is a parameter namedCOM_ARM_WO_GPS. Is that set to 1? -
@Emon_dey Can you post the output of
ls /etc/modalai? Are you trying to arm in manual mode? There is a parameter namedCOM_ARM_WO_GPS. Is that set to 1?@Eric-Katzfey I have uploaded the screenshot with output of ls /etc/modalai command
I was able to arm and fly it in Manual model, the 'COM_ARM_WO_GPS' parameter value is set to 1.
In fact, I want to arm it in Position mode and it still shows a warning of 'Horizontal gps error is too high' and the error 'Obstacle avoidance is not ready'. -
@Eric-Katzfey I have uploaded the screenshot with output of ls /etc/modalai command
I was able to arm and fly it in Manual model, the 'COM_ARM_WO_GPS' parameter value is set to 1.
In fact, I want to arm it in Position mode and it still shows a warning of 'Horizontal gps error is too high' and the error 'Obstacle avoidance is not ready'.@Emon_dey The file voxl-px4.conf is in that screenshot.
-
@Eric-Katzfey I have uploaded the screenshot with output of ls /etc/modalai command
I was able to arm and fly it in Manual model, the 'COM_ARM_WO_GPS' parameter value is set to 1.
In fact, I want to arm it in Position mode and it still shows a warning of 'Horizontal gps error is too high' and the error 'Obstacle avoidance is not ready'.@Emon_dey said in Can't arm the Sentinel Drone.:
Obstacle avoidance is not ready
How is the parameter
COM_OBS_AVOIDset? Should be zero. -
@Eric-Katzfey I have uploaded the screenshot with output of ls /etc/modalai command
I was able to arm and fly it in Manual model, the 'COM_ARM_WO_GPS' parameter value is set to 1.
In fact, I want to arm it in Position mode and it still shows a warning of 'Horizontal gps error is too high' and the error 'Obstacle avoidance is not ready'.@Emon_dey said in Can't arm the Sentinel Drone.:
Horizontal gps error is too high
What happens if you set the parameter
EKF2_GPS_CHECKto 1?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login