Starling loosing stability when switching from position mode to trajectory mode
-
We are using voxl-mapper for autonomous indoor flights and we are experiencing strong height looses or even drifting sideways when switching from position mode (Drone hoovering in position hold mode with 90-100% QVIO quality) to offboard (trajectory). Sometimes it is a short drop in height, but most of the times the drone reaches the floor or drifts sideways at a considerable speed until we switch to manual mode and land. The times it is able to regain stability, voxl-mapper works as expected. Any idea of what can cause this?
Thank you in advance
-
We are using voxl-mapper for autonomous indoor flights and we are experiencing strong height looses or even drifting sideways when switching from position mode (Drone hoovering in position hold mode with 90-100% QVIO quality) to offboard (trajectory). Sometimes it is a short drop in height, but most of the times the drone reaches the floor or drifts sideways at a considerable speed until we switch to manual mode and land. The times it is able to regain stability, voxl-mapper works as expected. Any idea of what can cause this?
Thank you in advance
@iparra I have narrowed it down a little. It has to do with apriltag detection. As soon as the service is enabled the drone looses stability even switching to figure_eight mode. The following options were enabled "en_transform_mavlink_pos_setpoints_from_fixed_frame": true, "en_tag_fixed_frame": true. Maybe it has something to do with the transforms. Any idea? Is the use of tag-detector in some way incompatible with autonomous navigation?
-
@iparra I have narrowed it down a little. It has to do with apriltag detection. As soon as the service is enabled the drone looses stability even switching to figure_eight mode. The following options were enabled "en_transform_mavlink_pos_setpoints_from_fixed_frame": true, "en_tag_fixed_frame": true. Maybe it has something to do with the transforms. Any idea? Is the use of tag-detector in some way incompatible with autonomous navigation?
@iparra Have you gone through the steps in the VIO troubleshooting guide? https://docs.modalai.com/flying-with-vio/#troubleshooting-vio
-
@iparra Have you gone through the steps in the VIO troubleshooting guide? https://docs.modalai.com/flying-with-vio/#troubleshooting-vio
@Moderator Not all of them, recalibrated IMU, measured vibrations and some times vibrations were about 5 on the z axis. The problem happens when apriltag detection service is running.
-
When we start voxl-tag-detector service with "en_tag_fixed_frame": true any change to offboard mode makes the drone loose the position, heavily drifting sideways. Isn't the px4 control referenced only to local frame? If so tag relocalization shouldn't affect the hold position. Is there any other configuration we are missing?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login