Using a aftermarket Power Module for the Flight Core V2
-
Hi, I just had a question on using an aftermarket power module being that the one that came with my flight core v2 stopped working.
The After Market pin layout:
-5v
-5v
-Vcurrent
-Vbatt
-GND
-GNDThe Flight Core V2 calls for:
-5V
-GND
-I2C3_SCL
-I2C3_SDAWhere can I put the Vcurrent and Vbatt wires to have the flight controller still read the power consumption and voltage?
-
Hi, I just had a question on using an aftermarket power module being that the one that came with my flight core v2 stopped working.
The After Market pin layout:
-5v
-5v
-Vcurrent
-Vbatt
-GND
-GNDThe Flight Core V2 calls for:
-5V
-GND
-I2C3_SCL
-I2C3_SDAWhere can I put the Vcurrent and Vbatt wires to have the flight controller still read the power consumption and voltage?
-
@lccarter it doesn't look like your aftermarket power module supports voltage and current monitoring in the same way as ours does. Our APM has an i2c voltage and current monitor built in.
@Moderator thank you I appreciate it.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login