Starling is losing position in indoor flights
-
Hi,
Problem # 1:
I am trying to fly the ModalAI Starling in "Position" flight mode, but it's continuously losing it's position while flying in "Position" mode and going to "Altitude" flight mode automatically.Problem # 2:
I am experiencing RC Loss (see log # 2 below) while the drone is approx. 3 meters away from the drone.Can you please tell us how to fix these issues and why these issues are appearing?
We just bought the drone last week.Below given are the logs of the flights with problems:
Log # 1 - Drone is losing position (invalid setpoints)
https://review.px4.io/plot_app?log=c22fe72f-8dcf-45e5-a344-27fbc0513479Log # 2 - Drone is losing position and RC loss
https://review.px4.io/plot_app?log=d347bebd-53b9-4cfb-94ca-7e34ee719b99Log # 3 - Drone is losing position (invalid setpoints)
https://review.px4.io/plot_app?log=cc771087-2edd-4111-9cfa-f3004fe91c9eLog # 4 - Position Loss with Collision Prevention
https://review.px4.io/plot_app?log=3b2a00d4-58c6-4af2-bf7c-e698b259a44fWe need 100% stable indoor flights ASAP.
-
Hi, can you please review the VIO troubleshooting guide and see if you can capture the proper debugging data?
-
Hi, can you please review the VIO troubleshooting guide and see if you can capture the proper debugging data?
@Moderator
Any word on the "RC Loss" problem?I am continuously experiencing the "RC Loss" problem, even from a few inches or feet.
This has happened so many times, even during the flight the connection to the RC is lost and done is on it's own and it land (fail safe).Log # 1:
https://review.px4.io/plot_app?log=d347bebd-53b9-4cfb-94ca-7e34ee719b99Log # 2:
https://review.px4.io/plot_app?log=495b6910-01b4-4311-a4b7-89ba6c20fac9As you can see in the below pictures, the drone is connected with the laptop over WiFi, RC is ON and has enough power (3.9 V).
Camera preview is available on the laptop, and QGC shows a "Manual Control Lost" message on the screen.
I don't see the signals bar on the screen of the RC.
-
@Moderator
Any word on the "RC Loss" problem?I am continuously experiencing the "RC Loss" problem, even from a few inches or feet.
This has happened so many times, even during the flight the connection to the RC is lost and done is on it's own and it land (fail safe).Log # 1:
https://review.px4.io/plot_app?log=d347bebd-53b9-4cfb-94ca-7e34ee719b99Log # 2:
https://review.px4.io/plot_app?log=495b6910-01b4-4311-a4b7-89ba6c20fac9As you can see in the below pictures, the drone is connected with the laptop over WiFi, RC is ON and has enough power (3.9 V).
Camera preview is available on the laptop, and QGC shows a "Manual Control Lost" message on the screen.
I don't see the signals bar on the screen of the RC.@muhammadbilal1 those RC operate at 915MHz. Any chance you have interference in the area? Alternatively, maybe the wiring between the receiver and the VOXL 2 was manipulated or came loose?
-
@muhammadbilal1 those RC operate at 915MHz. Any chance you have interference in the area? Alternatively, maybe the wiring between the receiver and the VOXL 2 was manipulated or came loose?
@Moderator As far as I can see, there is no interference in the area, I am working along for like 100's of meters. I don't have any such equipment in my premises which can interfere.
Physically, I checked the "915MHz ELRS Receiver" (BetaFPV Nano RX) and it's not lose. What else I can check?
Please help us fix all the issues, we are in agony since we started using this (Starling) kit.
I have other open issues too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login