Enabling CAN driver on VOXL2
-
I wanted to use CAN to integrate the VOXL2 with a bus to run motors but noticed that the SocketCan drivers are not enabled in the default VOXL2 image. I'm aware the Flight Control board has a CAN interface (https://forum.modalai.com/topic/1560/can-device-support/2?_=1696869997420) but I wouldn't make any use of the other peripherals on that board. Even if I use a Flight Control board, the CAN interface to the PX4 controller would not enumerate on the VOXL2 as a SocketCAN-compatible interface e.g.
can0without this kernel module.How feasible would it be to add the CAN module into the VOXL2 kernel?
-
I wanted to use CAN to integrate the VOXL2 with a bus to run motors but noticed that the SocketCan drivers are not enabled in the default VOXL2 image. I'm aware the Flight Control board has a CAN interface (https://forum.modalai.com/topic/1560/can-device-support/2?_=1696869997420) but I wouldn't make any use of the other peripherals on that board. Even if I use a Flight Control board, the CAN interface to the PX4 controller would not enumerate on the VOXL2 as a SocketCAN-compatible interface e.g.
can0without this kernel module.How feasible would it be to add the CAN module into the VOXL2 kernel?
-
W wilkinsaf referenced this topic on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login