Spektrum transmitter binds, but RC signals not appearing
-
I'm going through the initial setup of the VOXL m500 and am having trouble configuring the RC transmitter. I am using a Spektrum DX9. After configuring the IP address in the conf file and connecting to the m500 over QGroundControl, I am able to put the receiver into bind mode. After successfully binding, I can move the sticks but QGroundControl does not show any response from the channels. When I attempt to calibrate the RC channels I get an error saying zero channels detected. Does anyone have any ideas where I am going wrong?
-
The spektrum pairing should be identical to any PX4/Pixhawk pairing. Sometimes there is a final commit button that is missed when configuring in QGroundControl.
-
@mvxl500 like Chad mentioned, typically with the PX4/QGC setup you have to power cycle PX4 after binding:
From: https://docs.modalai.com/configure-rc-radio/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login