pDDL2450 Carrier Board USB Host connection issues

[rjpking92]

Hi ModalAI team,

My name is Roody Pointjour and I am working on a project which involves integrating the VOXL2(with add-on board, carrier board USB dongle) with the Microhard modems (pDDL2450), and I'm having the same exact issues that were discussed in this post.

https://forum.modalai.com/topic/1799/microhard-carrier-usb-dongles-do-not-work-with-microhard-pmddl2450/12

The PC that I'm using (Windows 10) for the slave configuration with the carrier board shows the same error message (This device cannot start code 10). I also tried it on the Raspberry Pi but I still can't get a connection from the USB host port.

[Chad Sweet]

@rjpking92 the add-on board and usb dongle are two separate PCBs. The add-on board only works with VOXL or VOXL 2, and the carrier board connects to a PC

[rjpking92]

@Chad-Sweet I have the add-on board working with my VOXL2 , but my carrier board isn't connecting to my PC!

[Chad Sweet]

@rjpking92 have you installed the lan7500 drivers?

[rjpking92]

@Chad-Sweet No I have not installed the lan7500 drivers. How can I install it?

[Chad Sweet]

@rjpking92 Google led me here: https://www.microchip.com/en-us/product/LAN7500#

[rjpking92]

@Chad-Sweet I installed the driver, but I'm still receiving the same code 10 error. To tell you the truth when I first connected the carrier board to the PC it worked fine, but a few days later it just suddenly stopped connecting altogether.

[rjpking92]

@rjpking92 )