OK, cool 👍 thanks❗

Will try.

@Thomas-Eiszler That's the plan we're working towards also, I did make some tries with AT commands also, but had to put the work aside for other commitments in the past few weeks. The information from yourself and @groupo above helps a lot. It shouldn't be too hard to make a service out of a python script for this. I'd been pursuing getting the data direct from the Qualcomm chipset, but AT commands and gpsd queries seen to be the way to go.

Hi @dan64
That is not the standalone Modem board variant and many other components are missing to make this work.
We do not currently sell the "standalone" version of the M0090 (5G) or M0130 (4G LTE), so sadly your efforts will hit a dead end.

@LR The 5G configuration on Starling 2 is a fairly new offering so there may not be fully representative docs live.

@Alex-Kushleyev That was it! I first tried with a lower baud rate of 250K on PX4 and I started getting the battery info. Then as you recommended, I uploaded new parameters to the ESC. I used:

python3 voxl-esc-upload-params.py --params-file ../voxl-esc-params/D0014_starling_1504_3000kv_ms_props/D0014_starling_1504_3000kv_ms_props.xml

because I will be using it on a drone of similar size and performance. Then with 2M baud rate in PX4, I was able to make it work!

Thank you.