Topics created by Jonathan Davis

@Jonathan-Davis said in Unable to run my own offboard node in starling 2:

offboard_mode

Check:
https://docs.modalai.com/mavros/#configure-voxl-vision-hub-localhost

offboard_mode - set to “off”. When offboard_mode is on, this enables voxl-vision-hub to command the drone to move, which we don’t want (we only want MAVROS to be sending movement commands)

Hi @Jonathan-Davis,

Our Starling v2 VOXL 2 board requires this flat build image (M0054-2 Starling QDL Image 1.7.4) which is available in our protected downloads as well as in the unbricking documentation here where you can proceed with the same step-by-step instructions. When finished, the qdl command should complete and the terminal should output "partition 1 is now bootable" indicating a successful QDL flash.

Hope this helps!