Hey @alex-kushleyev, good to know it holds up like that under load, and thanks again for the reply.
Two things I'm trying to pin down on the Mini:
Power. Can a USB port on the VOXL Mini actually supply around 2-2.5 W, and can it do that on one port while a small USB camera runs on the other? Or should I plan to power those externally?
Extra camera slot. From the D0013-V2 CAD the imager board looks like 5 DF56 coax connectors with 4 used (EO + dual AR0144 + Boson+), and the Lepton is on the M0187 SPI adapter so it's off the CSI bus. Is that spare coax connector wired to a usable CSI lane, and would voxl-camera-server take a 5th sensor (an M0161) there without a custom config?
Thanks,
Eyal
